Kit Includes: (1) Passenger Side Tail Light (1) Driver Side Tail Light
Quantity: 2 Piece
Specification
Side Location
Driver & Passenger Side
Vehicle Light Option
without Circuit Board
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Tail Lights 1992-99 Chevy Suburban
How to Replace Tail Light 1995-2000 Chevy Tahoe
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Taillight Assembly
Remove the two screws that secure the taillight
Pull the taillight straight out.
Disconnect the harness.
2. Replacing the bulbs
Remove the two screws on the connector board.
Pull the bulb you want to replace out. Push the new one in.
Replace the connector board and the two screws to secure it.
3. Replacing the Taillight Assembly
Reconnect the harness.
Line up the taillight and push it into place.
Replace the two screws.
This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi. I'm Mike Green. In this video, I'm going to show you how to replace the taillights on, this is a 1999 Chevrolet Suburban, but the taillight procedure is the same for this style suburban, Yukon, Tahoe, and also the 88 to 98 Chevrolet and GMC trucks. We'll get to it.
Taillights, once you open the tailgate or the rear doors, are held in by two screws, one down there, and one up in there. What I have here is a magnet to help me not drop these screws when they come out. If you do end up dropping one, it's just a regular screw. You can get one from the hardware store to replace them.
Now that we have removed the screw, then we can just pull on the light a little bit. There is a gasket around the edge, so it does stick. Now that the light is separated, you can just reach in and, with your thumb, pull back the tab and pull out the harness. This here is your taillight connector board. Sometimes, if you're taillight's not working, you replace this board, and it will work. Also, if you just want to replace the bulbs, you just remove the two little screws here, pull the board out, and you can replace the bulbs.
With that, now we can reinstall it, hook up the harness, get the tabs to line up, and push it in. Line up your tabs, then put the screws in. What I would suggest for putting the screws back in is put the screw on the screwdriver, very carefully put it in. Same thing with the bottom one, very carefully.
There you have it. Taillight replacement on a 92 to 99 Suburban or 88 to 99 Chevy or GMC truck. Not much more than a Phillips screwdriver, a pen magnet if you have one, and you're set. You can either fix the damaged one, or if your light's not working in your replace the bulbs, and also replace the taillight connecting board.
We hope this helps you out. Check out www.1AAuto.com for all your parts needs. Thank you. This video was brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Call us toll-free 888-844-3393 with any questions. We're the company that's here for you online and here for you in person.
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
1. Removing the Taillight
Remove the taillight caps with a flat blade screwdriver
Remove the two Phillips screws from the taillight bracket
Pull the taillight out
Disconnect the taillight wiring harness
2. Servicing the Bulbs
Remove the two Phillips screws holding the circuit board
Pull the bulb out of the light
Push on the new bulb
Twist the bulb clockwise into the light
3. Installing the New Taillight
Insert the circuit board onto the taillight
Insert the two Phillips screws onto the circuit board
Reconnect the wiring harness to the taillight
Line up the bolt holes on the taillight bracket to the bolt holes on the vehicle
Replace the two Phillips screws into the taillight bracket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service as well as replace the entire taillight assembly on this 1996 Chevy Tahoe. We show you on the driver side, but the passenger side is the same procedure. The items you'll need for this include new taillights from 1AAuto.com, a flat blade screwdriver, and a Phillips screwdriver.
Using your flat blade screwdriver, you want to pry out this cap and this cap right here. Now, you want to remove this Phillips screw and this Phillips screw. We'll just fast-forward as Don does that. Now, pull the taillight straight out and then pull back on the tab on this harness and pull it free.
Now, if you want to just service the bulbs, you just remove these two Phillips screws holding on this panel. Now, you just pull the bulb out and then push your new one in. The other two are the exact same way. If your circuit board ever breaks, we do offer exact replacements at 1AAuto.com.
To replace the bulbs, you can just put that circuit board back into place and replace those two Phillips screws. In the back is the original light; in the middle is the new light from 1AAuto. You can see in exact replacement. We also offer kind of a performance style and these styles do change from time to time. This is example of what we were offering when this video is done.
To re-install, plug it back in, put the light in place, and line up the holes, and re-install those two screws.
Replace those two caps. To give you a better idea of how they look, on the left is the new one and on the right is the old one. You can see they're identical. These just look a little bit newer. Then for the performance taillight and just a close up of it. And you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Product Reviews
Loading reviews
5.00/ 5.016
16 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
16
0
0
0
0
As advertised.
Brandon
February 12, 2017
Parts came well packaged. Upon opening my boxes I found exactly what I had ordered. The install video was also useful.
Great fit...just like the factory lights
James
March 1, 2017
Great fit...just like the factory lights. I've bought many products from 1A Auto and have been pleased every time.
same as oem
jeff
September 20, 2017
Perfect fit. 1991 k1500. No bulbs or panel included with this set.
They could not have fit better and great quality. 100% satisfied.
Richard-
May 30, 2018
I was so satisfied that I ordered the front grille and replacement lights for the front of my GMC 1990 Sierra. My comfort in knowing I wasn't wasting my time in placing the order was crucial. This is my company of choice from now on.
Shiny new lights.
R
February 13, 2019
Needed new lights and came across this site. And watched a video on utube and liked what I saw and ordered a set of taillights and was very pleased with the fitment of the lenses. So I changed them both left and right. It was a easy enough to replace them both. And it really looks so much better and bright now. Now to order the headlights.
Tim
March 15, 2020
Quick shipping, fit as they should.
Big Change
M
March 17, 2020
Fit perfectly and look outstanding.
Perfect fit
V
July 3, 2020
Love these, was an exact fit. Makes the truck look like new. Would definitely recommend to anyone looking to update an older rig.
I give 5 stars
James
March 27, 2021
The products, headlight switch, tail light set came fast, all product is good quality and they fit perfectly. Very happy and plan on ordering more product that I need.
I was impressed with the parts, as the arrival of parts on the scheduled day , Thanks, Ray Hodges
Owen
July 18, 2021
I have ordered, a set of tail lights, a set of headlights, and front parking lights. Along with a two piece tail-gait latch assembly and headlight switch and as well as a brake -light switch, and everything fit perfectly. I could not be more pleased with the service and quality of the parts, they made my 91 Chevy Silverado look original. I will we ordering from 1-A Auto again when I need other parts.
Outstanding service
Kev
November 21, 2021
They fit perfect
Look great.
Thankyou 1 A auto
Great looking taillight covers
ARMANDO
December 15, 2021
Nice looking product
Tail lights
Carlos
November 1, 2022
Nice fit.
Raymond
November 2, 2023
Fit excellent, looks good too.
KEITH
April 1, 2024
These are a great for my truck
Steve
April 23, 2024
Well built...fit very well..,they look very good.
Customer Q&A
Do they come with clips & screws ?August 28, 2017
Javier S
10
This pair of tail lights do not come with any hardware.
September 3, 2017
Tim K
do these fit a step side?December 6, 2018
Foster A
10
These taillights do not specify if they fit a step side. If your vehicle is listed in the fitment list, they are compatible with your model.
December 6, 2018
Christa R
do they have the gaskets attached?November 14, 2021
John D
10
Yes
November 14, 2021
J V
10
Yes they do
November 14, 2021
Brian B
10
I used my old ones because the ones that came with it did. Ot fit as well.
November 14, 2021
BRUCE B
10
Hello, this is just the taillight lenses, they do not come with the gasket or the circuit boards.
November 15, 2021
Ricale A
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.