Replaces

1997 Chevrolet Tahoe Driver & Passenger Side Windshield Wiper Transmission Arm 2 Piece Set TRQ WWA06899

88-02 Chevy C&K Series Pickup Wiper Transmission PAIR

$ 69.95

$97.95

29% OFF

$97.95

29% OFF

FREE SAME DAY SHIPPING

Read 23 REVIEWS

WWA06899

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Description

Vehicle Fit

Warranty & Shipping

How-To & Tools

Part Details

Quantity: 2 Piece Set
Kit Includes:
(1) Passenger Side Windshield Wiper Transmission Arm
(1) Driver Side Windshield Wiper Transmission Arm

Specification

Side Location

Driver & Passenger Side

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.

How to Replace Windshield Wiper Transmission Arm 1995-2000 Chevy Tahoe

Created on:

Tools used

Flat Blade Screwdriver

Phillips Head Screwdriver

10mm Socket

Ratchet

11mm Socket

1. Removing the Hood Cowl

Pry off the wiper arm clip with a flat blade screwdriver Pull off the wiper arms Remove the two Phillips head screws from the hood cowl corner panels Pull off the corner panels Remove the two Phillips screws from the cowl Pull off the hood weatherstrip Remove the six Phillips screws behind the weatherstrip from the cowl Pull off the washer hose Pull off the cowl

2. Removing the Wiper Transmission Linkages

Loosen the two 10mm nuts on the driver side wiper linkage Push the driver side linkage off its stud Remove the three 11mm bolts from the driver side linkage Pull off the driver side linkage Loosen the two 10mm nuts on the passenger side wiper linkage Push the passenger side linkage off its stud Remove the three 11mm bolts from the passenger side linkage Pull off the passenger side linkage

3. Installing the New Wiper Linkages

Loosen the outside 10mm nut on the driver side linkage Remove the inside 10mm nut on the driver side linkage Feed the linkage into place Push the linkage onto the wiper motor stud Fasten the two 10mm nuts onto the linkage Push the linkage post into place Insert the three 11mm bolts into the linkage Loosen the two 10mm nuts on the passenger side linkage Feed the linkage into place Push the linkage onto the wiper motor stud Push the linkage post into place Insert the three 11mm bolts into the linkage Fasten the two 10mm nuts onto the linkage

4. Reinstalling the Hood Cowl

Push the cowl into place Connect the windshield washer hose to the cowl Insert the two Phillips screws into the cowl Insert the six Phillips screws along the cowl edge Push on the two corner panels Insert the two Phillips screws into the corner panels Push on the weatherstrip Push the wiper arms into place Push in the wiper arm clips

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the wiper linkages on this 1996 Chevy Tahoe and it's the same part and process on these Tahoes from '95 to 2000. The items you'll need are new wiper transmission linkages from 1AAuto.com, a Phillips screwdriver, a flat-blade screwdriver, a 10 millimeter, and an 11 millimeter socket, and a ratchet.

First, using a flat-blade screwdriver, just pry up this clip and pull the wiper arm up and off. Do the same for the other wiper arm. Next, you want to remove this Phillips screw from either side of your vehicle. This panel just pulls off. Repeat the process on the other side. Then remove this Phillips screw and the Phillips screw in the same spot on the other side. We'll just fast-forward as Don does this. Now, pull off your weather strip. Then, remove these six additional Phillips screws. We'll fast-forward while Don does this. Now, pull the cowl up and forward. Now you just want to pull your washer hose off and slide the cowl out.

Now, loosen these two 10 millimeter nuts on the driver's side linkage. Once you've done that, you can push it right off of its stud. Remove these three 11 millimeter bolts, and we'll just fast forward as Don does that. Now, you can pull your driver's side linkage up and out. Now loosen the two 10-millimeter nuts on the passenger side linkage, and we'll fast-forward as Don does this. Then, push that off the stud and remove these three 11 millimeter bolts. Now, the passenger linkage will pull up and out.

On the left, are the old wiper linkages; on the right, are the new ones from 1A Auto. You can see they're identical and they're going to mount exactly the same. Now, on your passenger side wiper linkage, just loosen up the 10 millimeter nut on the outside and remove the one on the inside. Then feed the wiper linkage back into place. Push it back onto that wiper motor stud and replace that 10 millimeter nut. We'll just fast-forward as Don tightens up both of those 10 millimeter nuts. Now, push the linkage post up into place and replace those three 11 millimeter bolts. Now, loosen up the two 10 millimeter nuts on your driver's side wiper linkage and feed it back into place. Pull the linkage post up into place and push the other end onto the wiper motor stud and then replace those three 11 millimeter bolts. We'll fast-forward as Don tightens those up and then, tightens those two 10 millimeter nuts on the other end of the linkage.

Now, put your cowl panel back into place and reconnect the washer hose. Then, line it up and replace those two Phillips screws on either side of the cowl panel and then replace the six screws in the center of the cowl panel. Now, replace those two side panels and the Phillips screw that holds them into place. Push the weather strip back on and then close your hood. You want to line up that line with the slot. Push the arm back onto the post. Push the tab in and put the arm down, then repeat the process for the other arm and then you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

Product Reviews

Loading reviews

3.78/ 5.0

Horrible Fit

Joe

Not even close on the fit of the stud (your part) to the wiper arm (original GM factory arm). I used grease on the wiper arm and still had to hammer the arm in place. Now the passenger side stud assembly is loose even though the 3 bolts are secure. If I have to service the passenger arm in the future, I will have to sawzall the dam thing off. What a waste of money.

Wiper arm assembly ok

I ordered this set of replacement wiper arms for our 1999 Chevy Tahoe. The install went fine with the exception that the manufacturer allowed solder to flow into the splines of the post, which I had to carefully grind off. Otherwise a good buy, and good delivery.

Wiper arm

Horrible. The wiper arm dosent really fit the post. Went on half way and then got stuck. And Now i cant get the arm off. Poor quality.

Just right

The transmission arms I purchased from you guys are great quality and work well.

Working well

John

Changed the stripped old wiper transmissions out with these new replacements and they work great

Perfect fit and excellent quality parts!

Christopher

Price and quality is great! And the online video made everything easy! Thanks!

Solid

Corey

Fixed the wipers on my 98 Cheyenne. They seem to work smoother too.

Great product - easy to find

Finding the correct part was very easy, price point was better than all parts stores I shopped, product was shipped and received on a very respective time line and most of all every part I have ordered fits my vehicle better than an in-person parts store!

Perfect fitment

Kaesid

Delivery time was amazing. Also, referred to the YouTube video upon install. Very helpful!

Poor manufacturing

I had recently purchased the pair and the installation went fairly nice. Putting on the wiper arms to the transmissions was a bit of a challenge, but a little WD40 and a rubber mallet helped me knock them down. After I laid the wipers back onto the winshield, my passenger arm was way up. It could be possible, but I dont see how this could be an error of mine, as these transmissions are keyed. If anyone has an recommendations, I would definitely be open to suggestions and correct my review. I tried letting them run for a second to see if that would make a difference and nothing. Wiper arm is about a quarter up the windshield from where it should be. I watch a lot of the 1A auto tutorials and decided Id try out their parts. Cant say Id do it again.

Wiper

Timothy

Great product

Easy Peasy Install.

Robert

Exact fit. Works well. And easy to adjust wiper position. But, the best part was the 1A Auto installation video which even told you in advance what tools and size sockets you would need.

Good but not perfect

Wayne

The part that hooks up to the wiper arms was a little too big for my 97 suburban. I was able to provide some percussive persuasion and get them on.

Not sized tight for remounting wiper arms

Raymond

They install well but are not sized well for remounting the wiper arms. Needed to tap the original arms back on with a hammer and a piece of wood. Hope they do not need to come off anytime soon. Ill be cutting and replacing next time.

Just not very good. I don't recommend.

Stewart

Just okay. Wouldn't buy these again. I'd look for parts of better quality. Wiper arms are not in correct position now. Had to trim cowl cover on driver's side to clear the wiper arm. These transmission assemblies feel lightweight compared to stock. Even the nuts that bolt on to the motor shaft are smaller, at 8MM vs the stock 10MM. I don't know how long they will last, but at least it's easy to change them and they have a great video on the installation. I would have returned them, but I was stuck. I didn't have time to wait. Also, price wise these are much better than my local parts store. I guess you get what you pay for.

You get what you pay for.

GERALD

I purchased both the TRQ wiper arm transmissions and the TRQ wiper arms. My concern was that if I used two different brands they may not connect together properly. The transmissions fit in just fine, no issues, but when I went to attach the arms to the transmissions they didnt fit. Neither driver nor passenger arms would attach. There is a little clip on the bottom of the arms that slides back and forth and on both arms, the clip didnt slide far enough over to allow you to slide these arms onto the transmissions. I took a grinder and a 4 pound sledge hammer to the transmission to modify them enough to get these arms on. I really hope that I dont have to remove them anytime soon. They had to be pounded on. The arms dont rest in the right area. The passenger arm is up midway on the windshield. Technically they function, but appearance is 3 out of 5 due to misalignment and fit is 1 out of 5 because they wouldnt go together even though they are the same exact brand. If you are not mechanic

stephen

good fit still working

Sergio

They fit perfectly easy to install

tough changing out arms

Larry

though it was not an easy job getting to these arms, my wipers now work smoothly and repeatedly.

No more floppy wipers

Peter

K1500 1990 wiper transmission perfect fit easy install.

Waste of my money, and time on wiper transmissions!

stephen

I was extremely disappointed in these products. Drivers side was splined wrong, and would not accept the original arm. the passenger side was incorrectly timed. At its lowest adjustment point, it was 3 inches too high. I wound up taking the bushings off of your "high quality new parts" to install on my original 25 year old parts, just to make work like they're supposed to. I have purchased several pairs of wheel bearings from this company, and have no problems yet. Maybe you should stick to suspension parts.

Whiper transmission

GARY

It fit and it works.

Fits Good - Works Good - Good Price

Philip

Fits good, works good, good price. I am a repeat customer of 1Aauto.

Customer Q&A

No questions have been asked about this item.