Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace EGR Valve 1996-2002 Chevy Tahoe
How To Replace EGR Valve 2001-02 GMC Sierra 2500 HD
Created on:
Tools used
Socket Extensions
Flat Blade Screwdriver
Painter's Tape
10mm Socket
Ratchet
1. Removing the EGR Valve
Pry up on the tab and pull the EGR wiring harness free
Remove the two 10mm bolts from the EGR valve
Pull the EGR valve up and out
If possible, remove the EGR gasket with a flat blade screwdriver
2. Installing the EGR Valve
Hold the gasket to the EGR valve by applying small pieces of tape
Lower the EGR valve into place
Insert and tighten the 10mm bolts to the EGR valve
Reconnect the EGR valve wiring harness
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the EGR valve on this 1996 Chevy Tahoe with the 5.7-liter V8 engine. It's the same part and process on these Tahoes from 1996 to 2002. The items you'll need for this include a new EGR valve from 1AAuto.com and a 10mm socket and ratchet with an extension.
Your EGR valve is located right here. You want to just pry up on that tab and pull the harness free. Then remove these two 10mm bolts. We'll just fast-forward as Don does that. Now pull the EGR valve up and out.
There is a gasket here but if you have trouble removing it, just leave it on there. On the right is the old EGR valve; on the left is the new one from 1A Auto with a new gasket. You can see they're identical, and they'll fit exactly the same.
To keep your gasket from falling off, just use some small pieces of tape to tape it on there. Now lower your EGR valve down into place, and replace those two 10mm bolts and tighten them up. Then reconnect the harness, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Socket Extensions
10mm Socket
Ratchet
1. Removing the EGR Valve
Remove the two 10mm bolts from the EGR valve
Lift the EGR Valve up and off
Disconnect the EGR valve wiring lead
2. Installing the New EGR Valve
Put the EGR valve gasket into place
Put the new EGR valve into place
Start the two 10mm bolts by hand
Tighten the two 10mm bolts into the EGR Valve
Connect the EGR valve wiring lead
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the EGR valve on this 2002 GMC Sierra 2500 HD. This particular part is actually used in a large variety of GM models. The only tool you're going to need for this is a 10 millimeter socket and ratchet with an extension.
Here's the EGR valve and you're just going to want to remove these two 10 millimeter bolts on either side of it and we'll just fast forward as he removes those bolts. Just lift the EGR valve up and off and then lift the tab on the lead and pull it free.
Here is our old EGR valve and the new one from 1AAuto. Now, you just want to put that gasket down into place and put your EGR valve into place and you just want to replace those two 10 millimeter bolts. You can see he starts them off by hand and then he's going to use the socket to tighten the rest of the way. We'll just fast forward as he does that. Now you want to reconnect your lead.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
ESS00167
In Stock
Product Reviews
Loading reviews
4.42/ 5.012
12 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
1
1
0
1
Works great.
N
September 19, 2018
This set up came with everything I need to install with out any problems. Great quality.
Great part
Joel
February 10, 2019
Really great part especially for the money. Easy to install and really good quality. Will definitely order from 1a auto again.
Great parts
D
August 26, 2019
These parts worked well
1999 Chevy Silverado 1500 EGR Valve & Tube Kit
B
January 20, 2020
I love 1a auto. The egr kit that I bought from them was a perfect fit and a really good quality part too. I would definitely order from them again!
Perfect fit
M
September 8, 2020
Went to replace EGR valve and bracket literally disintegrated. Bought this kit and was just what I needed. Was a little hard getting bolts out of manifold but once done Was perfect fit. Runs great. I would recommend this kit to anyone who runs into a similar situation. High quality part.
Did the job
Christopher
April 18, 2021
Took care of the code seems to be running well.
Danny
August 4, 2021
Did not work I'm sending it back made my engine light come on had to get one from dealer
Braydon
September 25, 2021
Good quality but I wish the kit came with both gaskets instead of just 1
Great
Daniel
February 26, 2024
Excellent the fact that yall do videos for the parts yall sell is a tremendous help thank you
Evan
March 12, 2024
Parts fit well but egr did not work after contacting 1 a auto they took care of the part and sent me a new one
Where is the EGR Valve located on a 2002 chevy suburban 1500 5.3 flex fuel?December 20, 2016
Aaron G
10
I have a 6 liter. Most likely yours is in same neighborhood. Either follow tube out of exhaust manifold, or out of intake manifold. Can't miss valve
December 20, 2016
JEFFREY G
10
The EGR valve should be located towards the top of the engine, but removal of the intake duct is required to access the mounting screws and ensure proper removal.
December 20, 2016
Alex P
Does this come with the bolts?August 9, 2019
Michael B
10
Thank you for your inquiry. New hardware is not included with this item. You may be able to reuse your original hardware if it is in good condition. Please let us know if you have any other questions.
August 9, 2019
Peter L
Will this fit my 04 gmc Sierra 6.0?October 10, 2019
Logan D
10
Thank you for the inquiry. This will fit only the 2001 and 2002 years for the 6.0L, this will not work with the 2004 model year.
October 12, 2019
Curtis L
Original hardware is unusable. What is the bolt length and thread?January 5, 2020
Kyle P
10
We do not have any information on the dimensions of the hardware at this time. Please do not hesitate to contact us with any further questions.
January 5, 2020
Emma F
Will this work on my 2002 chevy Sierra pick up? Also do you sell the wire kit for it?October 25, 2020
Ronald C
10
This fits many 2002 Chevy Silverado's and GMC Sierra's. Please check the 'Vehicle Fit' tab to find specifications for fitment, thank you!
October 26, 2020
Andra M
Does it include with all gaskets and the bolts mine wont be salvageable. Also it looks like theirs only one bolt to the tube that goes to the intake but this shows 2?October 20, 2021
Jonathn D
10
New hardware is not included with this item. You may be able to reuse your original hardware if it is in good condition.
October 20, 2021
Cristina P
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.