Replaces
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a power mirror switch on this 2002 Chevy Suburban. It's the same part and similar process on these Suburban's from 2000 to 2002. The items you'll need for this include a new mirror switch from 1A Auto.com and a flat blade screwdriver.
Pry up on your switch panel and lift it forward and out. Then pry out on this tab, pull the harness free, and then push the tabs on these harnesses, and pull them free. From the back of your mirror switch, just pry out on either side while pushing from the other side, and the switch will pop out.
On the left is the old power mirror switch; on the right is the new one from 1A Auto. You can see they're identical and they're going to fit exactly the same. Push your new mirror switch into place and reconnect your harnesses. Push the backend of your switch panel in first, push down the front, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the driver side switch pack on this 2002 Chevy Suburban. The items you'll need for this include a new power window switch pack from 1AAuto.com and a flat blade screwdriver.
Pry up on your switch panel and lift it forward and out. Then pry out on this tab, pull the harness free, and then push the tabs on these harnesses and pull them free. Then remove these two T20 Torx bolts. We'll just fast-forward as Don does this. Now pry out at the top of the switch panel and just pull the panel down and out.
Take your new switch panel and push the top end in first. Then push the back ends down in, and replace those two T20 torx bolts. Reconnect your harnesses. Then push the back end to your switch panel in first, and then push down the front and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
