Matched TRQ Kit: Fit, lab, and road tested for peak performance
Application Specific Design: No modifications necessary
Heat Range and Life Cycle Tested: Exact match to stock specifications
Complete repair to restore your engine to like-new conditions
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
How to Replace Ignition Coil 2000-06 Chevy Suburban
Created on:
Tools used
Socket Extensions
10mm Socket
Ratchet
1. Removing the Ignition Coil
Disconnect the ignition coil wiring harness
Remove the 10mm bolt from the hose bracket
Pull off the hose bracket
Disconnect the spark plug wire from the ignition coil
Remove the two 10mm bolts from the ignition coil
Pull the ignition coil up and out
2. Installing the New Ignition Coil
Push the new ignition coil into place
Insert the two 10mm bolts into the ignition coil
Connect the spark plug wire to the ignition coil
Push the hose bracket into place
Insert the 10mm bolt into the hose bracket
Connect the ignition coil wiring harness
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an ignition coil on this 2002 Chevy Suburban with the 5.3 liter, V8 engine. It's the same part and similar process on these Suburbans from 2000 to 2006. The items you'll need for this are a new ignition coil from 1AAuto.com and a 10mm socket and ratchet with an extension.
Your ignition coils are located right here. There are four on each side since this is a V8 engine. To remove these ignition coils, it's the same process for each of them; they're held in with two 10mm bolts. The only difference is this one right here that has a bracket for these hoses over it and that bracket also just held in with a 10mm bolt. We'll show you on this one since it's a slightly different procedure. Just lift up on the tab and disconnect that harness, and then, using a 10mm socket and ratchet, just remove that 10mm bolt, right there. Now you can just pull that bracket aside, and then, pull your spark plug wire from the ignition coil. Then remove the 10mm bolt at the top and the bottom of the coil. The coil will pull right off.
On the left, is the old ignition coil; on the right, is the new one from 1A Auto. You can see they're identical and they're going to fit exactly the same. Take your new ignition coil and push it down into place and then replace those two 10mm bolts. We'll fast forward as Don does this. Now reconnect your spark plug wire and then push this bracket back into place and replace that 10mm bolt. If you're replacing multiple ignition coils, obviousl,y you just repeat the process for each one and finally just reconnect the harness and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Everything as described, shipped quickly! Made a huge difference to startup and idle. Happy to see everything I needed in one package.
My coil pack experience
Joshua
December 20, 2023
Sold the very issues I was having and has my engine running so much stronger now. Everything arrived undamaged and very well organized. Definitely will be ordering more parts.
Daren
January 2, 2024
Horrible. The spark plugs were stripping out my block threads. So I had to put my old plugs back in.
I like the part
Gustavo
January 6, 2024
Good
Very good product, ?? on the whole package.
Terry
January 14, 2024
Everything went together just
fine. No problems at all. I would definitely recommend your product.
Great Value!!
Mitchell
February 23, 2024
The price can't be beat. Did the tune up all at once and now our Yukon runs like a new one.
GREAT QUALITY
Michael
April 9, 2024
It was just right. Exactly as advertised. Very good price and quality. I'm just as skeptical as anyone else about these kind of things but it is 100% legit. I highly recommend ??
I will be purchasing more parts from 1a auto.
Rome
July 7, 2024
This kit has my GMC Yukon running like new.
Donald
September 8, 2024
Out standing.
#1 all the parts worked out great.
Thank you again.
Customer Q&A
What kind of spark plugs are used in the
Ignition Kit TRQ TKA06283?January 24, 2023
Cristyan G
10
They are Iridium Spark Plugs.
January 25, 2023
Andra M
do the spark plugs come pre-gapped?May 10, 2023
Sahi O
10
Yes, the spark plugs will come pregapped.
May 11, 2023
Andra M
10
Seems like they are, the wires might be hit or miss though sadly.
May 11, 2023
Dillon B
10
My wires were all different lengths.
May 27, 2023
Steve M
What's the uf?February 24, 2024
John D
10
The UF will be the same as the original equipment.
February 26, 2024
Emma F
Will these 2005 parts fit my 2004 h2 hummer ?March 8, 2024
Steve C
10
This will be correct for your vehicle, only if you have 10.50 inch spark plug wires.
March 11, 2024
Nick R
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Cadillac is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Cadillac or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.