Replaces
Replaces Chevrolet GMC Cadillac Front & Rear 5 Piece Suspension Kit TRQ PSA52596
$1,069.95
Replaces Chevrolet GMC Cadillac Front & Rear 4 Piece Magnetic Ride Control Complete Shock Assembly & Shock Absorber Kit TRQ SKA39928
$1,023.95
Replaces Chevrolet GMC Cadillac Front & Rear 8 Piece Magnetic Ride Control Suspension Kit TRQ PSA39444
$1,010.95
Replaces Chevrolet GMC Cadillac Front & Rear 4 Piece Magnetic Ride Control Shock & Strut Kit TRQ SKA42931
$896.95
Replaces Chevrolet GMC Cadillac Front & Rear 8 Piece Suspension Kit TRQ PSA52595
$884.95
Replaces Chevrolet GMC Cadillac Rear 3 Piece Air Suspension Kit Arnott ARSFK00015
$849.95
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Install Tip: You may be required to reset the vehicle computer after installation of this part.
Highest Quality MaterialsMade from highest quality materials that meet or exceed OEM standards
Quality Tested - built to a strict level of product standards.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
We're going to remove the mass air flow sensor. It's right here off the air box air cleaner assembly. Start by unplugging it. Place that aside. This is a T-15 Torx screw. Make sure you grab those screws so you don't drop them. Just pop this out. It's got a little seal on it. It'll come right out.
This is the old mass air flow sensor. It's got five pins in there. This is the new one. Five pins. Virtually identical. These are your heating elements and sensing elements in here. You don't want to touch those. Just leave them alone. It's got the O-ring in here that's going to seal on the intake tube. This should fit right in.
We're going to install our new one. It does have a key here and a key here. It also has an arrow in the direction of airflow. You just want to make sure that this arrow is pointing towards the engine, 'cause otherwise this key way shouldn't let you install it, but you don't want to try to force it. That should seat right in there on the O-ring. You'll feel it seat right in there. You got your screws, T-15 Torx, just have a very light Torx. Basically hand tight, 'cause they're just screws in the plastic. To complete it, just plug the harness back in.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the mass airflow sensor on this 2011Chevy Silverado 1500. The only tool you'll need is a T15 bit and a ratchet or a T15 driver would also work.
Your mass airflow sensor is right here on this air intake hose. You just want to push the tab on the bottom of that connector and pull it free, and then remove the two T15 screws on either side of the airflow sensor. Once removed, the sensor just lifts right up and out.
Now you just push your new airflow sensor down into place, and you replace those two T15 screws. Reconnect the harness to the mass airflow sensor, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
