WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Tail Lights 1992-99 Chevy Suburban
How to Replace Tail Light 1995-2000 Chevy Tahoe
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Taillight Assembly
Remove the two screws that secure the taillight
Pull the taillight straight out.
Disconnect the harness.
2. Replacing the bulbs
Remove the two screws on the connector board.
Pull the bulb you want to replace out. Push the new one in.
Replace the connector board and the two screws to secure it.
3. Replacing the Taillight Assembly
Reconnect the harness.
Line up the taillight and push it into place.
Replace the two screws.
This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi. I'm Mike Green. In this video, I'm going to show you how to replace the taillights on, this is a 1999 Chevrolet Suburban, but the taillight procedure is the same for this style suburban, Yukon, Tahoe, and also the 88 to 98 Chevrolet and GMC trucks. We'll get to it.
Taillights, once you open the tailgate or the rear doors, are held in by two screws, one down there, and one up in there. What I have here is a magnet to help me not drop these screws when they come out. If you do end up dropping one, it's just a regular screw. You can get one from the hardware store to replace them.
Now that we have removed the screw, then we can just pull on the light a little bit. There is a gasket around the edge, so it does stick. Now that the light is separated, you can just reach in and, with your thumb, pull back the tab and pull out the harness. This here is your taillight connector board. Sometimes, if you're taillight's not working, you replace this board, and it will work. Also, if you just want to replace the bulbs, you just remove the two little screws here, pull the board out, and you can replace the bulbs.
With that, now we can reinstall it, hook up the harness, get the tabs to line up, and push it in. Line up your tabs, then put the screws in. What I would suggest for putting the screws back in is put the screw on the screwdriver, very carefully put it in. Same thing with the bottom one, very carefully.
There you have it. Taillight replacement on a 92 to 99 Suburban or 88 to 99 Chevy or GMC truck. Not much more than a Phillips screwdriver, a pen magnet if you have one, and you're set. You can either fix the damaged one, or if your light's not working in your replace the bulbs, and also replace the taillight connecting board.
We hope this helps you out. Check out www.1AAuto.com for all your parts needs. Thank you. This video was brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Call us toll-free 888-844-3393 with any questions. We're the company that's here for you online and here for you in person.
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
1. Removing the Taillight
Remove the taillight caps with a flat blade screwdriver
Remove the two Phillips screws from the taillight bracket
Pull the taillight out
Disconnect the taillight wiring harness
2. Servicing the Bulbs
Remove the two Phillips screws holding the circuit board
Pull the bulb out of the light
Push on the new bulb
Twist the bulb clockwise into the light
3. Installing the New Taillight
Insert the circuit board onto the taillight
Insert the two Phillips screws onto the circuit board
Reconnect the wiring harness to the taillight
Line up the bolt holes on the taillight bracket to the bolt holes on the vehicle
Replace the two Phillips screws into the taillight bracket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service as well as replace the entire taillight assembly on this 1996 Chevy Tahoe. We show you on the driver side, but the passenger side is the same procedure. The items you'll need for this include new taillights from 1AAuto.com, a flat blade screwdriver, and a Phillips screwdriver.
Using your flat blade screwdriver, you want to pry out this cap and this cap right here. Now, you want to remove this Phillips screw and this Phillips screw. We'll just fast-forward as Don does that. Now, pull the taillight straight out and then pull back on the tab on this harness and pull it free.
Now, if you want to just service the bulbs, you just remove these two Phillips screws holding on this panel. Now, you just pull the bulb out and then push your new one in. The other two are the exact same way. If your circuit board ever breaks, we do offer exact replacements at 1AAuto.com.
To replace the bulbs, you can just put that circuit board back into place and replace those two Phillips screws. In the back is the original light; in the middle is the new light from 1AAuto. You can see in exact replacement. We also offer kind of a performance style and these styles do change from time to time. This is example of what we were offering when this video is done.
To re-install, plug it back in, put the light in place, and line up the holes, and re-install those two screws.
Replace those two caps. To give you a better idea of how they look, on the left is the new one and on the right is the old one. You can see they're identical. These just look a little bit newer. Then for the performance taillight and just a close up of it. And you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
GM080-SASYR
In Stock
Product Reviews
Loading reviews
5.00/ 5.013
13 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
13
0
0
0
0
M
September 28, 2017
I totally recommend this website and products . I ordered a rear end light bulb set for a 1996 year car and I didn't think they would have it but they did and it worked perfectly so I'm satisfied with the product and the services given.
Arrived earlier than expected
C
October 24, 2017
It was the part we needed. Came with the bulb which in description it said no bulb so that was a nice surprise. One was broken sure to soft pkg but didn't matter because we weren't expecting and already had the bulb. We will definitely use you again! Thank you!
Part ordered and deliverd as promised
D
December 7, 2017
Found your site through DIY vids on YouTube. Ordered a new part I needed, cheaper than it would have been from a junkyard and with free shipping! Came in a couple days and works perfectly.
Thank you. We will be doing more business with each other soon and often.
Perfect fit
Alan
December 31, 2017
Replacement taillight assembly fit like original part. Was pleasant surprise that bulbs were included.
Fit as needed
S
July 25, 2018
Product was as advertised or actually a little better, I'll explain. So I received the product went to go install on truck, everything fit as it needed to and took care of my issue which was my top light wouldn't come on and my blinker on passenger side would always blink fast. The awesome thing about the product was it came with bulbs! Which saved me a few bucks at the auto parts store. Would recommend.
Circuit board
Datrick
June 9, 2019
I purchased this circuit board because my blinker and brake lights were not working properly. The bulbs were not blown but they were not working. I bought the circuit board, installed it and everything works fine.
Turn signal assy.
jerry
July 8, 2019
Right rear signal 1997 Chevy Silverado 4wd auto.It fit like a charm and works flawlessly. Will definitely buy from aauto again.Thanks again for quick delivery and a excellent product.
Works great
Sean
July 25, 2019
Arrived and perfect fit.
Very Happy
Joseph
December 21, 2019
Fast and Great Service with Friendly Advice. Definitely will shop with them again.
Great Parts
RANDY
January 8, 2020
Great Parts , fit great, work great, fast shipping and solid customer service. thank you.
Good price and good fit
Jacque
March 21, 2020
I appreciate 1A and their videos and great service. But you want to hear about this taillight assembly... I have a 1998 Silverado and this fit well. A bit snug, since the plastic tab on the bottom was a tiny bit larger. But it was possible to insert that tab first and it went in and the holes lined up for the screws. Lights work perfectly - happy about the bulbs being included!
This truck is almost an antique, so Im happy to find parts and at a good price! Thanks, 1A Auto!
right side replaces board
J
May 15, 2020
I got this in the mail in good time and I put it on and worked very well. No problem with this job.
98chevypu
roland
May 18, 2020
Perfect fit, priced right and timely delivery
Customer Q&A
Does this come with the bulbs installed?September 25, 2016
Shevon A
10
It may have bulbs installed but are NOT warrantied. What you are actually buying is the circuit board
September 26, 2016
Brian F
10
I think it did but I'm having trouble remembering for sure. I do know that I haven't had any issues with this board whatsoever. 100 times better than the junk board at auto zone. Hasn't gone out or stopped working at all due to bad connection.
September 26, 2016
Matthew M
10
the one I received did have bulbs
September 26, 2016
Lawrence V
10
Yes It does
September 26, 2016
Steven M
10
Yes, just as the picture shows. Its a very easy install. I highly recommend this item.
September 27, 2016
Wilford W
10
Yes the unit came with the bulbs.
July 8, 2019
Jerry H
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.