Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tailgate Glass Support Struts 2007-14 Chevy Suburban
How to Replace Tailgate Support Struts 2007-14 Chevy Suburban
Created on:
Tools used
Flat Blade Screwdriver
Assistant
1. Removing the Tailgate Glass Support Struts
Lift the glass
Have an assistant hold the glass
Pry out the clip with a flat blade screwdriver
Pull the strut off of the stud
Repeat the process for the other end and side
2. Installing the Tailgate Glass Support Struts
Press the strut onto the stud until it snaps
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
The rear glass struts aren't used that often, so sometimes they don't go back, or sometimes because they're never used and they go bad. Generally, you want somebody to hold up and small right-angle pick and work under the clip here. Usually it's best to just pull the clip right off, and the strut comes off, and then the same thing at the top. Pull on the strut while you remove the clip and it comes off.
Here are the original worn out ones from the vehicle and the new ones from 1A Auto. It's exactly the same, just no optional dirt, and they're going to go on to fit and function the same and this you can use for both. You never know which one's bad, so it's always a good idea just to replace these in pairs.
To reinstall, have someone help hold up, push on, and you may have to twist them. Do the same thing on the other side. Make sure it's on there tight. Lift up and down and lock the other one in place. Now, if your glass is sagging or not supported well, you fix the problem, and the glass you always want to put it down lightly and then just press firmly on that handle.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Flat Blade Screwdriver
Assistant
1. Removing the Tailgate Support
Support the tailgate with a piece of wood or have an assistant support the tailgate
Pry off the clip at the bottom of the tailgate support with a flat blade screwdriver
Pull off the bottom of the tailgate support
Pry off the clip at the top of the tailgate support with a flat blade screwdriver
Pull off the top of the tailgate support
2. Installing the New Tailgate Support
Push the top of the tailgate strut into place
Push the bottom of the tailgate strut into place
Push the clips in with a flat blade screwdriver
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
On each end there's a little clip. Use a small flat-blade screwdriver and pry the clip as you pull, and as you do this, you can't see it on camera, but I have somebody helping by holding the tailgate, and obviously if your tailgate's not staying up you'll have someone holding it. Pry out on the clip, if need be you can carefully just take the whole clip off, and it comes off. Then at the top there's the same thing, push your screwdriver in, pry out on the clip, and bring it off.
Here are the new support struts from 1A Auto, and here's your original ones. New ones are just like the original. You can see the original have an angled bottom, and the new ones from 1A Auto are exactly the same. They're going to go in, mount, and function, exactly the same.
For reinstallation, you'll need to lift up really hard on your tailgate, and again, it’s always good to have a person help you. They just clip on the top, I'm going to twist them, and just kind of let your tailgate down if you have to. Put it on the bottom, and do the same thing over here. Clip on the top, twist, and make sure that they're supporting.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Product Reviews
Loading reviews
5.00/ 5.06
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
Fit just right
M
July 2, 2019
1A Auto had the right product at the right price and I got it quick. I was able to quickly identify the right part for my Tahoe. Thank you so much.
Shockingly Good
Brian
October 15, 2019
Easy to replace and work great
I would recommend this product
Hatch Lift Supports and Glass Lift Supports
Steve
December 15, 2020
I watched the 1AAuto uTube showing how to replace the lift support on the rear Hatch and Glass of my 2008 Suburban then ordered the struts from 1AAuto. The entire job of replacing the four struts took less than 5 minutes. Now the rear hatch stays up and so does the glass in the hatch. I highly recommend the uTube help 1AAuto provides and the parts to execute the repair.
The best
Ahoguilmar
July 26, 2021
Muy buenos y fcil de instalar les recomiendo este producto 100%
Great choice
Scott
May 18, 2022
Good quality product.
Winn
May 26, 2022
Perfect fit. Works great
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.