1998 Chevrolet K3500 Truck Under 15000LB GVW Rear Driver & Passenger Side Rearward 2 Piece Leaf Spring Shackle Repair Kit TRQ PSA66600

so far so good, glad it has a limited lifetime warranty

Have not installed product yet, but product came missing one bolt. This is disappointing , whoever packed the shackles could not have missed a bolt missing. Would be hard to recommend anyone to buy this product.

I ordered leaf spring shackles for my 99 Silverado 2500. The shipping was free and they arrived when they were supposed to. I find the 1A Auto videos on YouTube very helpful and I was happy to give them my business. I have no complaints and Ill buy from them in the future.

These are the right part. Have fun torching out the old bushings and pressing in the new ones but when its done itll be a proper job.

Ok so I ordered this for my husband who is working on a project truck. I thought I would suprise him and when it came In he said he didn't need those for the truck. I was so disappointed , Well to make a lot g story short it ended up that he did indeed needed them and he was happy with the parts and me...lol so Thank you 1aauto. Helen McClintic

I thank you for your fast service and quility parts. They fit my truck with out a problem, thanks again.

Very good parts prob.better than new

I have a 1998 GMC K1500 Z71 that Im installing a 6 lift on and doing a complete rehab on the suspension. After the beating I took replacing the front lower control arm bushings I figured replacing the shackles would be less painful than replacing the lower bushing on the stock shackles to go with my new springs. I was unable to find Moog or AC Delco Professionals in stock so I found these TRQ pieces on A1. A1s service is always great and their products are usually spot on so this review gets a second star for that. Overall product quality is fine. The problem goes all the way back to whoever laid out the flat pattern for these blew the bend allowance calculations for the upper spring hanger flanges. This resulted in the width of the spring hanger being too wide for the spring. Comparing the stock shackles to the TRQ the difference in width is equal to the metal thickness on each side. This is a pretty common oops when laying out flat patterns for folded metal. TRQs solution is to provi