Direct Bolt-on Replacement: No modifications for an easy install
DOT Certified: Built to the highest quality standards
Complies with federal safety standard FMVSS-111
Matching set for a renewed appearance
Description
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace Side Mirror Glass 2007-13 Chevy Silverado
How to Replace Side Mirror Glass 2007-13 Chevy Silverado
Created on: 2019-01-16
Tools used
Trim Tool Set
Safety Glasses
1. Removing the Side Mirror Glass
Move the side mirror out away from the truck to make it easier to work on
Tape masking tape over the mirror to keep the glass in place if it happens to crack (note: we recommend wearing safety glasses in case the mirror glass cracks while you're working)
Insert the trim tools under the glass to pop the mirror up and out (if you have a hard time getting the glass out, you can also remove the upper outer plastic mirror covers and insert the trim tools around the upper part of the glass to remove it)
2. Replacing the Side Mirror Glass
Line up the mirror plate's tabs with the mirror cover's tabs
Wiggle the plate around until it locks into place
Remove the paper from one side of the mirror plate tape and line up the sticky side with the plate before pressing it down
Use a pick or screwdriver to remove the paper from the other side of the tape
Line up the mirror glass with the plate and lightly press it into place
Move the side mirror back to its original position
MGA10008
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Never regretted ordering parts through 1A auto.
[{"url": "https://images.turnto.com/media/pNISJll75W64CYGsite/6c7f3d7beb0084c19f63083b68339a8b_1717799304261_0.jpeg", "caption": "The glass is clear, it just got rained on"}]
Jeremy
June 7, 2024
Should've replaced it sooner. Glass was as advertised and their video walked through the simple process perfectly.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.