Replaces
Frequently bought together
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
This video is brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the internet.
Hi, my name is Mike Green. I want to help save time and money repairing your vehicle. I have 20 plus years experience restoring and repairing cars and trucks. My company, 1AAuto sells high quality replacement parts over the internet. In this video I'll be showing you how to install these pars. By the end of this video, you'll know how to install them and where to get them. That's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be installing an interior door handle on a 2004 GMC Sierra. This process is basically the same as all 1999 to 2006 Sierras, Yukons, Tahoes, Silverados, GM Trucks in general. For this repair, you'll need a medium size flat blade screwdriver, a pair of needle nose pliers, seven millimeter socket and driver, Torx driver small, and a ten millimeter socket and driver.
We're going to do a quick run through of taking the door panel off. We do have a more involved video in our other videos, but this will show you basically what it takes to remove the door panel. First, you remove the lock plate, use the screwdriver, pry gently, and then up top that's the mirror trim plate, two clips. Again, screwdriver. I used a rag to protect the paint, make sure it didn't scratch. Then, the door handle trim plate, which is just a screwdriver on the back side, then it comes off. Then, there's a small push pin, plastic push spin. Start it with a screwdriver, and then needle nose pliers to pull it out. After that, there's going to be three screws, that's the little trim plate and then a Torx screw and you'll see me really move here. Next one is right near the lock right here. Close up. Again, you'll see me turning it on.
Okay, and then one more down below the door pull. I do quick work. I'll say that. Then, I lift up and then door panel comes out. You got to unplug a bunch of accessories, that's the marker light on the back corner. Then, the power windows, power door locks and mirror control panel. Most of them just kind of push out in a little tab with your thumb and pull out. The third one here, you push in a tab, and then you rotate this little gray bar. This is the underside of it. There you go, and then, I'm struggling with it in real time there, or double time real time, then the last one, and your speaker. Once that free, then your door panel is free and we can slow it back down here. Let's see now, there's a door handle right on top of the water shield.
Now, you just remove that ten millimeter. First, we'll remove that blue clip that holds the lock actuating rod. Just kind of prior with the screwdriver to start it, and then you can pull it with your finger then the ten millimeter bolt. Once that's out, then the door handle just slides forward. Pretty neat design, comes right off. You can service it or replace it. We sell the replacements, 1AAuto.com. Then slide the new one in, or in this case it's the same one. We're just showing it to you. Ten millimeter bolt, and make sure that you replace that clip, and you're all set. Put the door panel back together and you're good to go.
This video is brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the internet. You can call us toll-free 888-844-3393. We are the company that's there for you on the internet and in person. Thank you very much.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the interior door handle on this 2002 Chevy Suburban. It's the same part and similar process on these Suburbans from 2000 to 2006. We show you on the passenger's side but the driver's side is the same procedure. The items you'll need for this are a new interior door handle from 1AAuto.com, flat blade screwdriver, 8mm and 10mm socket, and ratchet.
Start off by prying up your switch panel and then, pushing the tab on the harness and disconnecting it. Next, remove this 8 millimeter bolt, this 8 millimeter bolt right here, and this 8 millimeter bolt at the bottom of your door panel. We'll just fast forward as Don removes those three bolts. Pull out on this triangle panel and then pry out on this panel from the outside and then, slide it over the handle and out. Now, lift the door panel up and pull it free. Next, pry out your courtesy light and just push it through the door panel, and then, pry out on the tab and disconnect the harness. Push the tab on this harness and disconnect it. Then, pry out on the tab on this harness and pull it free. There your door panel is free.
Using a flat blade screwdriver, just pry this clip off your door handle rod, and then lift it out. Now, remove this 10 millimeter bolt, right here. We'll just fast forward as Don does that. Now slide the door handle towards the inside of the truck and pull it free.
On the bottom, is the old door handle; above it, is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Take your new door handle and push the rod back down into place and reclip it. Then slide those tabs back into the door and slide the handle back towards the outside. Just replace that 10mm bolt.
Now, to make putting the door panel back on easier, it helps to just pry out your manual lock switch. It just pulls right out. Then you want to reconnect your harnesses, and then pull your courtesy light harness through the door panel and reconnect your courtesy light. Then, push it back into place in the door panel. Then, put those hooks into those bottom slots and then slide the door panel back in place. Make sure all the clips are lining up, your harnesses are pulled through, and that it's fully back in place. Now, line up the rod with the manual lock, and push it back in, and then, replace those three 8 millimeter bolts. Now, you want the inside of this panel to go in first, so slide it over your door handle, and then, tuck that inside end in first, then the middle tab, and then, the back tab. Replace this triangular panel and then reconnect your switch pack harness, push the back end and then push the front end, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
