Replaces

2011 Chevrolet Silverado 2500 HD Driver Side Mirror Glass For Factory Equipped Mirrors Only TRQ MGA07172

07-13 Silverado, Sierra 1500; 07-14 2500, 3500 Non Towing Mirror Glass w/Backing LH

$ 28.95

$35.95

19% OFF

$35.95

19% OFF

FREE SAME DAY SHIPPING

Read 5 REVIEWS

MGA07172

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Get the kit

Manual 2 Piece Mirror Glass Set

$44.95

Description

Vehicle Fit

Warranty & Shipping

How-To & Tools

Specification

Side Location

Driver Side

TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.

Product Features

Direct Bolt-on Replacement: No modifications or special tools required

Complete Assembly: includes same mirror glass, housing, bracket and technology as the original unit

DOT Certified: Built to the highest quality standards

FMVSS-111 Compliant: Validated to be a dealership alternative

Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.

How to Replace Side Mirror Glass 2007-13 Chevy Silverado

Created on:

Tools used

Trim Tool Set

Safety Glasses

1. Removing the Side Mirror Glass

Move the side mirror out away from the truck to make it easier to work on Tape masking tape over the mirror to keep the glass in place if it happens to crack (note: we recommend wearing safety glasses in case the mirror glass cracks while you're working) Insert the trim tools under the glass to pop the mirror up and out (if you have a hard time getting the glass out, you can also remove the upper outer plastic mirror covers and insert the trim tools around the upper part of the glass to remove it)

2. Replacing the Side Mirror Glass

Line up the mirror plate's tabs with the mirror cover's tabs Wiggle the plate around until it locks into place Remove the paper from one side of the mirror plate tape and line up the sticky side with the plate before pressing it down Use a pick or screwdriver to remove the paper from the other side of the tape Line up the mirror glass with the plate and lightly press it into place Move the side mirror back to its original position

Product Reviews

Loading reviews

3.20/ 5.0

Disappointed with the instructional video and the instruction page

Marc

The video showed the mirror came in 3 pieces and separated easily in your hand. It did not. In effort to get it separated, I tried prying it with a screw driver. Afraid of breaking the mirror I called 1A to find out it does not come in three pieces but it was already one piece from the factory. I then asked about the removal of the of mirror. The video said to use a trim tool or screwdriver to pop the mirror up and out. I duplicated the procedure but the mirror did not pop up or out. The instructional sheet was worthless. I asked the representative how difficult should it be. I put a little more pressure in the upward motion as in the video and broke all the tabs. Therefore, I have nothing to secure the new mirror assembly to.

Warped mirror

David

The part itself looks just fine. However, when I installed it on my vehicle, it warps just slightly. The warp causes the mirror to distort the view. If I close one eye it looks fine. But with both eyes the slightly concave shape cause my eyes to seem cross-sighted.

Dont buy

Matt

Zero stars. The warped mirror makes it very hard to look at and use

Great for the price

Augustine

This non-heated version uses the OEM mounting bracket so it stays on very well. It is not as smooth as the OEM version but it is also really cheap. Unfortunately, I realized when I put it on that I needed the heated version so I had to return it.

Just having the videos are a great help!

Char

I love the store and watch videos alot. So thank you so much.

Customer Q&A

Do you have the passenger side also that's the one I need?

July 11, 2021

Darryl O

The correct part number for the opposite side is: 1AMRG00152

July 12, 2021

Adam G