Replaces
Frequently bought together
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi. My name is Mike Green. I want to help you save time and money repairing your vehicle. I have 20+ years experience restoring and repairing cars and trucks. My company, 1A Auto, sells high-quality replacement parts over the internet. In this video I'll be showing you how to install these parts. By the end of this video, you'll know how to install them and where to get them. That's going to save you time and money. Thank you and enjoy the video.
In this video we'll be replacing a side view mirror on this 2004 GMC Sierra, basically the same as '99 to '06 Silverado, Sierra, and the SUV's, Tahoe, Yukons, Escalades.
Replacing the mirror is actually pretty easy. It's only three bolts holding it on and then unplugging the connector, but you do have to remove the door handle, I'm sorry, the door panel. We're going to show you that pretty quick in this video, too. The tools you'll need are a flat blade screwdriver, a pair of needle nose pliers, a 7mm socket and driver, a number two Torx driver and a 10mm socket and driver.
We're going to double-time the door panel removal. To start out, you pry the ferrule around the door lock and the door lock button comes off. Then the mirror panel, which you would think that this is the only thing you've got to replace or take off, but that's not the case. It just has two clips that you use a screwdriver wrapped in a cloth and then the screwdriver to get the door handle trim plate off. Then there's a small plastic push pin. Use a screwdriver to start it and then some needle nose pliers. Then there's a little trim piece that you can just pull off with your finger. A number two Torx screw, take that screw out. You'll see me move quick here, like lightning. Then there's two more bolts, 7mm. One right there, next to the lock. Pull that out, lightning hands again, and then one up underneath the door pull, again 7mm, and again, lightning quickness. Once those bolts are out, the door panel just pulls up and out.
Then you'll need to unplug the courtesy light. Right here, actually, is where your mirror connects in. That one and that one is actually the mirror connection. We will need to go all the way with this, though, because you'll have to pull off your plastic water shield. Here's another connector, it's got a little tab and then this little lever pivots in order for that connector to come off. A little bit different. You can see me struggle with it there. Then the last connector, and then your speaker, provided you have the up level stereo or whatever. Take the speaker off and then you'll want to, after that, remove your door handle, which is pretty simple too. There's a little blue clip on there that holds that rod in place. Use a screwdriver to start it and then your finger to just reach in there, pull the rod out, 10mm bolt, unscrew that, slide the handle forward and it comes off.
Now you'll want to pull your water shield out. This is basically just to get the harness for the mirror off. I'm going to take it all the way off here, but you can just pull it down enough to get the harness free for your mirror. I'll show you, as far as replacing the mirror; it is three bolts, and unplugging the mirror. There's your mirror mounting. There are the three bolts. They are, I believe, 7mm, possibly 8mm. You would remove those three nuts and then you've got to remove the clips on this harness, which goes down into your door. That's why you have to take the door panel off, because that harness goes all the way down into your door. Once you've done that, you can replace the mirror, put the door panel back together and you're good to go. I hope this helps you out.
This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. You can call us toll free 888-844-3393. We are the company that's there for you on the Internet and in person. Thank you very much.
Tools used
Hi. I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.
What's up, guys? I'm Andy from 1A Auto. If you recently replaced your mirror glass and you're getting a distorted or a funhouse look in the glass, I'm going to show you what causes that and how to property install the mirror glass.
So on the back of the mirror glass there's all these clips, right here. And those are going to clip all around this ring here, and then there's also these little spacers right here that go in between here. So if you're installing this mirror glass, all those clips have to be pressed all the way on to this retainer, and if you're installing it you're holding the glass like this. When installing it, you push it on from the outside. You're not going to get all those clips installed.
So, when those clips are not completely installed and the mirror is bowed like that. That's what gives you that funhouse look.
All right, with the new mirror you're going to make sure that this gasket is in there if your mirror comes with one. Make sure none of the old gasket is on this mounting bracket here. We want to line this up right with that to make sure that goes on securely and make sure those clips get lined up in there. Make sure the wires are out of the way if your mirror has wires. You're going to take a rag and push in the center of the glass, and you're going to make sure it clips in. And you can push it pretty hard just be careful.
And your mirror should be installed properly and you should not have that funhouse look or that distorted look. You should be good to go.
Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping and the best customer service in the industry.
