All parts were a great fit which made install a better process. I wish the tie rod ends and the lower ball joints had grease fittings, I just worry about future maintenance and/or replacement. Hope this doesn't cause me any set backs down the road.
Replaces
All parts were a great fit which made install a better process. I wish the tie rod ends and the lower ball joints had grease fittings, I just worry about future maintenance and/or replacement. Hope this doesn't cause me any set backs down the road.
I rebuilt the front suspension on my 1980 GMC C1500 using 1A AUTO and the TRQ brand. Unfortunately, I haven't completed my restoration yet, but the suspension is done!
1981 GMC Jimmy 2wd Everything fits like it should. Only issues are with the lower ball joint. It is not serviceable, as in there is no zerk fittings to grease them, also the rubber boot on the lower ball joint was really difficult to put on to the point it felt like it might almost tear. Otherwise I am happy with everything for the price.
Love the stuff I ordered from y'all. Everything fit perfect.
Was exactly as described
Quality was excellent parts fit like they should shipping was very fast very well satisfied
One of the best everything fit on my truck c10 o recomend it
It was like installing factory parts, they should make all the joints greaseable would be my only complaint. Besides that 2 thumbs up!
Great
The parts were delivered on time and good quality.
They worked fine for my 86 1/2 ton chevrolet, so should fit yours as well as long as it is a 1/2 ton
Please provide your full vehicle information to confirm product availability and fitment for the suspension kit.
This kit is specific to 1984 Chevy C10 models.
Yes, this part will fit your vehicle.
PSA83670 is the driver side upper control arm, not a lower control arm.
Will this work with my 1974two wheel drive pick up c10
Yes
This part will not fit your vehicle, but we may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
No, these parts are for vehicles with the stock ride height and no modifications.
1978 until 1987 was all the same front end parts