WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Install Replace Tailgate Cable Straps 2007-13 Chevy Silverado GMC Sierra
Created on:
Tools used
13mm Socket
Ratchet
1. Removing the Tailgate Cable
Remove the 13mm bolt from the bottom of the tailgate cable
Unclip the top of the tailgate cable
Lift the tailgate cable up and off.
2. Installing the Tailgate Cable
Thread the 13mm bolt into the tailgate cable
Insert the 13mm bolt into the tailgate
Clip on the tip of the tailgate cable
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a tailgate cable on this 2011 Chevy Silverado 1500. It's the same process on a large variety of GM models. The only tool that you're going to need is a 13 millimeter socket, and a ratchet.
You don't need to do anything up here, but you want to remove this 13-millimeter bolt, right here. I'm going to fast-forward as he removes that. Once that lower bolt is removed, you just push the clip up, and off.
You can see here on the left is the old one. On the right is the new one from 1AAuto. They're identical. What you want to do is just put that bolt on by hand first, and tighten it up. Then use your socket and ratchet to tighten it the rest of the way. Now you just want to line that clip up on the bolt, and then pull it down, and it's all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
BDA69251
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Hummer is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Hummer or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.