Kit Includes: (1) Heater Blower Motor (1) Heater Blower Motor Resistor
Specification
Location
Front
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Highest Quality Materials
Made from highest quality materials that meet or exceed OEM standards
Quality Tested - built to a strict level of product standards.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Blower Motor Resistor 1995-2000 Chevy Tahoe
Created on:
Tools used
Flat Blade Screwdriver
7mm Socket
Ratchet
Needle nose pliers
1. Accessing the Blower Motor Resistor
Open the glove box
Push the sides of the glove box in as you pull it out
Unhook the glove box
Remove the glove box
2. Removing the Blower Motor Resistor
Remove the two 7mm bolts from the blower motor resistor bracket
Use a pair of needle nose pliers to undo the clips that connect the wiring harnesses to the bracket
Press the wiring harness tabs with a flat blade screwdriver
Disconnect the wiring harnesses
Pull the bracket down
Use a flat blade screwdriver to press the tab on the resistor relay
Pull out the blower motor resistor bracket
Disconnect the resistor wiring harness from the resistor
Remove two 7mm bolts from the resistor
Rotate the resistor upside down
Pull the resistor forward, down and out
3. Installing the New Blower Motor Resistor
Push the new blower motor resistor into place, being sure not to damage the coils
Insert the two 7mm bolts into the resistor
Connect the resistor wiring harness
Reconnect the relay to the bracket
Put the bracket into place
Clip the two wiring harnesses to the bracket
Insert the 7mm bolts into the bracket
Connect the two wiring harnesses
4. Reinstalling the Glove Box
Hook on the glove box
Push in the sides of the glove box as you push the glove box into place
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the blower motor resistor on this 1996 Chevy Tahoe. The items you'll need for this are a new Blower Motor Resistor from 1AAuto.com, flat blade screwdriver, 7mm socket and ratchet, and a pair of pliers.
Start off by opening your glove box and pushing in the sides and pulling it down, then unhook and pull. Next, you want to remove this two 7mm bolts. I'll just fast forward as Don does this. Now, using a pair of pliers, just push the tabs on the clips at the bottom of these harnesses and push them up and out of that bracket. Now, press the tabs on the top of the harnesses and disconnect them. Now, pull down the bracket and on the top of this relay, just push the tab and pull it free.
Your harness for your blower motor resistor is right here. Just pry back on the tab and pop the harness up and off. Just set that aside, and your resistor is held in with two 7mm bolts. I will just fast forward as Don removes both of those. Once those are removed, you can pull your resistor up and to get it out, you're going to actually have to rotate it upside down. Just keep working it around until it's completely upside down and then pull it forward and then down and out.
Take a new blower motor resistor from 1A Auto and just push it back into place. You want to make sure you don't damage any of the coils and just very carefully lower it back into place. Just again, make sure those coils are okay and that none of them are touching each other. Replace those two 7mm bolts. Now, reconnect your resistor harness. Replace your bracket and reconnect that relay and then take your two harnesses and push both of them back down into the bracket, and replace those two 7mm bolts that hold the bracket into place. Now, reconnect those two harnesses, and then take your glove box, put those hooks back onto those bars. Push the sides in and push the glove box back into place. You're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Product Reviews
Loading reviews
4.29/ 5.014
14 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
10
2
0
0
2
Works great.
Jesse
May 17, 2020
Parts are great quality and worlds great. Thank you.
Awesome 100% match parts
C
August 27, 2020
This is a legit product company I appreciate the close to OEM parts you guys sale.
Helpful tips
S
October 7, 2020
Delivered quickly. Parts are good . And I really like their tutorials. It has helped me tremendously. They make it so simple. Always a little longer and more time involved with me, but I don't have much knowledge when it comes to mechanics
Great Experience
D
January 5, 2021
1A Auto made getting the right part easy and with their installation video installing was a breeze. In spite of heavy holiday shipping, the part arrived on the day predicted and when pulled from the box, was exactly like the piece being replaced. I am totally happy with the service and attention to detail provided and would recommend 1 A Auto to my friends and family.
Top Notch Again!
Homer
February 27, 2021
This product was easy to find on the website. Perfect fit and was easy to install with the help of your video. I keep coming back to you for quality parts and the best prices.
Blower motor
james
March 5, 2021
Part worked and fit just like it should looking to buy more parts from 1a auto thanks you 1a auto
James
September 14, 2021
Works perfectly!
Shipping
Mike
October 19, 2021
We got it very quick
David
November 10, 2021
Worked very well!
A bit loud but otherwise great.
Adam
December 19, 2021
Great products. They did the job well. The only issue I have is the motor is a little loud for the lowest speed setting. When on low, it sounds kind of like someone in the distance blowing a car horn. It's not loud but louder than I would expect and goes away when the speed is turned up.
Heater
Alan
February 4, 2022
Worked just as it should have. Videos are always helpful as well
DO NOT BUY.
Kenneth
September 14, 2022
Do not buy this motor. After receiving two of these with the same manufacturing defects I requested a refund. The manufacturer mounted a magnet in the middle of the hole designed for the vent tube so you cannot install the vent tube. This was manufactured in Taiwan and as they say you get what you pay for so I have ordered one made in the USA.
I have the same problem that Kelvin has with the magnet being in the vent hole.
Wayne
July 16, 2023
The holes to mount the fan motor will not allow to reuse old screws. There is a gasket on the new motor housing that prohibits old screws. They are too short.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.