Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace Tail Light 2004-12 Chevy Colorado
Created on:
Tools used
Phillips Head Screwdriver
1. Remove the tail light
Use your Phillips screwdriver to remove the two anchor screws.
Pull out the tail light and unplug the wiring harness.
Twist and unplug the bulbs to replace them.
2. Install the new tail light
You can re-install the old assembly if you were just changing the bulbs.
Plug in the bulbs and wiring harness.
Line up the two tabs and click the tail light assembly into the truck.
Screw in the two Phillips screws.
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet. Hi. I'm Mike from 1A Auto. I hope this how to video helps you out, and next time you need parts for your vehicle think of 1AAuto.com. Thanks.
In this video, i'm going to show you how to service a taillight on one of these Chevy Colorado's pretty much same as a Colorado as well as the GMC Canyon. We're going to show you both if you're just looking to change a bulb as well as if you're going to replace the whole taillight assembly, because yours is broken or scratched or whatever. The only tool you'll need is a Phillips screwdriver.
Taillight service you'll need a Phillips screwdriver. There's one screw right down here. We'll remove that. Then there's another screw right here in your latch. We'll remove that. Your taillight will come right out. Just going to get my screw here. This will come out. These just turn counter-clockwise. All the bulbs just pull straight out and back in. If you're replacing your light because it's broken, your light from 1A Auto, it's going to go right in and fit just like the original. Just line up the bulbs correctly. Lock it into place. There are two tabs on the outside that line up with holes in the fender of the truck. Line them up. Push it right in. This screw straight in line. Tighten them up. Your all set.
We hope this helps you out. Brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free at 888-844-3393. We're the company that's here for you on the internet and in person.
LTA88408
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.