Replaces
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
Tailgate handle replacement on a S10, pretty easy. This is the bezel. You want to push down and bring it out. You can see it has two tabs that go down in. These tabs lock it in. You want to open up the tailgate here. Now there's three T40 or 40 Torx screws. Loosen them up. Now, I'll put the tailgate back up. Now that you have the tailgate handle loose, there are clips in here that hold the rods. You reach them with your thumb and your finger and pull that clip, pull that rod out. Now, let's see if I can get this other one. There's one right here. Pull that rod out and your tailgate handle should handily, unless I fumble around a little bit, should come up. Now, let's put it back in. Put it down in place.
The lower one comes from the right side of the truck. The other one. It's a little difficult, but not impossible. Then I'm going to start a screw in the back here. Actually, I'll start two so it holds it in place. Then we're going to open the tailgate. There are my two screws I started already. Put this one in. Tighten them all most of the way first. Then I tighten them up afterwards. Now, a good thing to do is just use some good white grease on your latches and also up here on the mechanism. Then last, pull the handle out just a little bit. You got to get the bottom in first. This truck could probably really use a new handle, but it seems to be working pretty good. That's how you take one out and put one in.
We hope this helps you out. This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Call us toll-free 888-844-3393. We're the company that's here for you on the internet and in person. Thank you very much.
