★★★★★
April 7, 2023
Replacement part
Perfect replacement for the broken switch.
Replaces
Part Details
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you have to replace the rear power window switch on this 1996 Chevy Tahoe. We show you on the passenger side, but the driver's side is the same procedure. We do recommend removing the entire door panel only because the clip that holds the switches can be a little bit stiff and hard to move and you could end up damaging your door panel trying to remove it. The items you will need for this are a new power window switch from 1AAuto.com, a 7 mm socket and ratchet, a flat blade screwdriver and a putty knife.
You want to start off by removing these two 7 mm bolts and we will just fast forward as Don does this. Using a flat blade screwdriver, pry right here at the top of this panel and remove it. Now we use a putty knife here to just pry back behind the door panel so you can get your hands back there. You want to just pull out near the clip and it will release it. You want to do this all the way around the door panel. Once all those clips are released you want to lift it up and off the window sill. And on the back of your door panel you want to disconnect your courtesy light harness by just pushing the tab and pulling it free. Do the same thing for your speaker harness. Then you want to just pry out the tab on this harness and pull it free. Using a flat blade screwdriver, just push this tab on the bottom of your window switch and push the switch through.
On the left is the new switch from 1AAuto. On the right is the old one. You can see they're identical and they will mount exactly the same. If the new switch's bezel doesn't match the bezel that your old switch had, then you can just swap the bezels by prying out these four tabs on the switch and pushing on it at the same time and it pulls out. Then you just push your new one into place. Now you can it back into your door panel. Just push the front end in first and then the back. Now to replace the door panel just reconnect your courtesy light harness, your speaker harness and your window switch harness. You want these clips to go into these holes right here so first just push your door panel down into the window sill. Now just look back behind the door panel and make sure they line up and then just hit them into place. Repeat this process around the door panel making sure that they are lining up so you don't break them when you hit them it. Then just replace those two 7 mm bolts and replace this bezel. You just hit it into place and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
SWA41539
Perfect replacement for the broken switch.
All is fine, thanks.
Perfect fit and match for my 1999 GMC K1500 Suburban
Identical to the original switch it replaced. I literally unplugged the old one and plugged in this one, and it worked. Pretty uneventful except for the little dance I did after I was done.
This part will fit the rear driver side and passenger side for the vehicles listed to fit.
This part will not fit your vehicle, but we may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
