2007 Chevrolet Malibu 4 Piece Lighting Kit DIY Solutions LHT04180
recommended installation videos
sponsored by
Out of Stock
$178.95
Notify When Available
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Part Details
Kit Includes: (2) Fog Lights (2) Headlight Assemblies
Quantity: 4 Piece
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Headlight 2004-08 Chevy Malibu
Created on:
Tools used
10mm Socket
Ratchet
1. Handling the Bulbs
Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
2. Remove the Head light assembly
Pop the hood and secure it.
Remove the two 10 mm bolts at the top of the head light assembly.
Lift the light up and out.
Unplug the head light assembly from the harness.
To change the bulbs, twist off the plastic cover to access them.
Remove the harness clip from the old headlight assembly if you are replacing it.
3. Install the new head light assembly
Transfer the harness clip to the new head light assembly
Plug the head light assembly into the harness.
Position the head light assembly in place and bolt in the two 10 mm bolts with your socket and ratchet.
Close the hood and enjoy your new 1A Auto headlights.
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
In this video, I'm going to show you how to remove and replace the headlights on this 2006 Malibu sedan, same as the Malibu Maxx as well. I show you both replacing the entire headlight assembly, as well as just replacing the bulbs.
Maybe you've gotten into a little accident or something, or a rock took out one of your headlights, or maybe as you can see on this vehicle in the before, you want to take your kind of clouded, faded headlights and replace them with nice new headlights from 1A Auto you can see in this after picture. It only takes about ten minutes, or five or ten minutes per side. All's you need is a 10 mm wrench. Again, you can go from an old car looking like this, take a bunch of miles, and it looks like this.
With the hood open, it's pretty easy. There are two 10 mm bolts, one here and one here. We use a 10 mm wrench or a socket and ratchet. Now I'll just speed up here as I remove those two bolts. Now lift the light up and out. You got a connector right here. You pull back on this tab and disconnect it. If you're looking to replace bulbs, you just twist these covers right off. The bulbs are inside. You can twist and pull the bulb out. Then remove the harness, so you have to pry out all these kind of ears here. Pull the harness down and off. Then the re-installation is just the reverse. Same thing for the parking side marker, it just pulls out of the socket. Push it back in.
Here's the new light from 1A Auto. You can see how much more clear it is. The only thing you're going to want to do is on the back of your old one, there's a little clip right here. Pull it off, use a small screwdriver, kind of keep your thumb on it. Pull out. Take it off. Lay it aside. Get into our new headlight. Right down here push it on. Headlight down. Plug it in. There's two pins that go into holes right down here. Just make sure those go down in. The gasket fits all flush. We'll speed it up here again as I start those two 10 mm bolts in, and then tighten them up with the socket and ratchet. We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
I need the wiring harness for this headlamp by itself so the pigtail. Can you tell me the party number for the wiring harness?June 7, 2021
Regina D
10
Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
June 7, 2021
Emma F
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.