Replaces
Replaces Chevrolet Pontiac Olds Driver & Passenger Side 2 Piece Headlight Set DIY Solutions LHT03068
$73.95
Replaces Chevrolet Pontiac Olds Passenger Side 2 Piece Lighting Kit DIY Solutions LHT08787
$59.95
Replaces Chevrolet Pontiac Olds Driver Side 2 Piece Lighting Kit DIY Solutions LHT04102
$59.95
Replaces Chevrolet Pontiac Olds Driver & Passenger Side 2 Piece Parking Light Set DIY Solutions LHT05223
$42.95
Replaces Chevrolet Pontiac Olds Driver Side Headlight Assembly Eagle Eyes GM151-B001L
$38.95
Replaces Chevrolet Pontiac Olds Passenger Side Headlight Assembly Eagle Eyes GM151-B001R
$38.95
Replaces Chevrolet Pontiac Olds Driver Side Parking Light Eagle Eyes GM152-U000L
$26.95
Replaces Chevrolet Pontiac Olds Passenger Side Parking Light Eagle Eyes GM152-U000R
$26.95
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com. Your source for quality replacement parts and the best service on the internet.
Hi I'm Mike Green. I'm one of the owners of 1AAuto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video we are going to show you how to replace the headlights on this '99 Venture. Same is '97-'05 Venture also the Transport in Montana and Silhouette. You can see I'm flipping back and forth between before and after. You can see how much nice those lights look and obviously how much better they will shine for you. Now GM intended these to be able to be changed without tools, but you probably will need a pair of pliers and a screwdriver especially if your truck's from the rustbelt as ours is.
Headlight replacement, there's the easy way which is the way it should be, which if you have a southern vehicle, it's not rusty. Your headlights will probably come out easy. This is a northeastern vehicle. I've already taken it apart and when I try to take it apart, this is a thumbscrew right here that you should be able to undo which I can undo now easily. When I first took it apart, I couldn't get it apart. I'll show you both ways. First let's show you the way a headlight should come out. You remove this thumbscrew. All right and then you pull your parking light out. You let it hang or you can replace it. I recommend if you're going to put a new headlight on, might as well put a new parking light. You'd want to remove the bulbs.
If you're not going to replace your headlight or if you're not going to replace your parking light, there's a little clip that usually stays behind right here. That's really the only reason you'd have to use the screwdriver. Just push that clip. You just want to push that clip back through so you can grab it out the backside. Okay and then that clip again if you want to use your old parking light, that clip would just press right back on right there. Now again if everything comes apart correctly, you'll be able to remove these two thumbscrews on the top of your headlight. You can see they're not quite coming off exactly on this and the headlight comes up off.
Here's your headlight bulb. If you're just looking to change your headlight bulb, it's a lot easier to take it apart like this than having to take apart everything that's in here. You'd remove this and then if you're just going to change your headlight bulb, you untwist this ring, pull it off and then your headlight pulls out, put your new one in, put the ring back on then the ring goes over some slots here. We'll close up here. We just want to make sure that you get all the teeth through the ring and then basically press on it while you're turning it clockwise. Now let me put this back here real quick here because I want to show you what happens when you have a Northeastern Vehicle like this like a lot of you probably will. If you have Northeastern vehicle like this one, I couldn't get this thumbscrew up first. I tried with my pliers and that's how I broke off one of the ears and I just couldn't get the thing. I couldn't get a good enough leverage on it.
Okay, so what I end up doing is using my pliers and pulling up the headlight facets first and then after you do that, you can actually just you then pull the headlight up and you can pull everything out. You can pull the parking light, the assembly out. Then what I was able to do is used pliers. I turned this and I actually used pliers on the non-threaded end of this thumbscrew and that's how I was able to get it out.
With that said, what you're really looking to do is put on a nice new headlight from 1AAuto. You can see a lot nicer, a lot clearer. Basically just hook up the bolts, pop over the bolt if you have to. There are two tabs here that go down into little slots here. You put those down into there. Let it straight down since this vehicle, like I said if you have a southern vehicle you won't have a problem but this vehicle again from the northeast. The studs actually unscrewed from the car. I'm just going to use a couple generic coarse thread screws. You can pick it up something like this at a hardware store, no problem. Let me start that one in. Start this one in. Let it tighten a bit.
Okay, so with the headlight looking this nice, are we really going to want to put this old parking light back on there? I don't think so. I'd just recommend getting our set which includes the new parking light as well. Now we're going to put it in and there's two lineup tabs back here. You put it in, you can look back there and see them easily enough and you look down between the parking light and the headlight and you can see that other clip go in. Okay, it's nudged in. Now we grab my original thumb screw from the part. Start that in. Get that part two screws. We take our pliers up and we're all set.
We hope this helps you out. Brought to you by www.1AAuto.com- your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video we're going to show you how to replace the parking light on this Chevy Venture. As you can see, as these switch from the before and after, a new set of lights on these vans really helps a lot in terms of both the look and obviously your ability to see. These parking lights should not require any tools, but if your truck is in the rust belt like ours is, you'll probably need some pliers and penetrating oil. Maybe even a screwdriver.
To remove the parking light here, it should be an easy job. GM tried to design it so it would be easy. There's actually a thumbscrew right here, and you can see actually one of the ears is broken off because on this vehicle it was pretty rusted. I can't even -- actually, I got it started now. You would take off this thumbscrew. If you can't get this thumbscrew off, you can use a pair of pliers and try and get it started that way. The first time I took this apart, I actually couldn't get this thumbscrew out.
First I'll show you the way it should happen, which is you remove this thumbscrew. Then you pull out on the light like that. There's actually a clip down here. You can see right here the clip actually stayed with the headlight bracket. Just use a flat blade screwdriver and push that clip out.
Now, if you're looking just to change the bulbs, they twist out. For this one, press down on all the tabs, twists out, and the bulb just pulls from the socket. Then this one twists out like that, as well. That bulb pulls out back in, as well.
Now, if your light got broken in an accident, or you just want to freshen up your van a little bit, you can see the light from 1A Auto is going to be a whole lot more clear. It's going to mount in just like the original. You can see there's the clip on and everything. Actually what I'm going to do is I'm going to reinstall this original one, just because I'm going to show you what to do if you can't get it apart the right way. I'll show you what I mean by that. Then after I do that, I'll show you installing the new one. You put that on, twist, put that on, twist. Then you have tabs back here. As you're putting the light in, you can look back and see those tabs go in to the right spot. I'm looking right through that crack. Then you can see down in. You can see that clip, and make sure that goes in the right spot. Just put it back on. Now I'm just going to put this in. Obviously, you put this in and tighten it up.
Now, if you run into where you can't get this apart, and when I first took this truck apart, I actually could not get this out. What you're going to want to do is basically take out the whole headlight assembly. You undo these two. Again, the first time I did this I actually used a big pair of pliers on these, because these are a lot easier to get to then this one that's way down in here. You see, take these out. These are actually not coming off correctly. These wing nuts should just come off, but it's actually . they're kind of rusted together, so they're pulling the stud up and out of the car. Once you get that out, then you basically have to lift up on the headlight, and out, and just pull the whole assembly right out. Then again, twist the bulbs in the parking light and then just pull your headlight free. Now you have the whole assembly. What you can do is you can use a pair of pliers and help. Use a lot of penetrating oil, and usually a pair of pliers will help you get this apart. Now I'm actually going to install a new headlight to compliment my new parking light. Just put that right in. I'm just going to use a couple of coarse thread screws in place of the original fasteners. I'm not going to tighten them all the way yet. Now with my nice new light, again, it's the same thing. Put the light in. You can see the tabs back there. Make sure our clip goes in the right spot there. Put our thumbscrew back in here.
Like I said, GM tried to make this so you could do this without tools, but up here in the Northeast things rust. That's basically what happens, so you need to use pliers, and screwdrivers, and stuff like that. Then when you put this together, just keep the light pushed in here a little bit. Tighten that up, and you're all set with a new light and a new headlight to complement it.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
