Kit Includes: (1) Water Pump (1) Thermostat Seal (1) Thermostat
Quantity: 2 Piece
Specification
Engine Displacement (Metric)
V8 5.7L
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Thermostat Housing 2003-10 Dodge Ram
Created on:
Tools used
13mm Socket
Socket Extensions
Flat Blade Screwdriver
Drain Pan
Ratchet
1. Draining the Coolant
Raise and support the vehicle
Have a drain pan ready
Open the radiator drain by hand
Allow the coolant to drain
Open the hood
Twist the radiator cap counterclockwise and off
Once the coolant has drained, tighten the radiator drain by hand
2. Removing the Upper Radiator Hose
Loosen the radiator hose clamp near the engine with a flat blade screwdriver
Pull the hose off of the engine
3. Removing the Thermostat
Remove the two 13mm bolts from the thermostat
Remove the thermostat housing from the water pump
Pry the thermostat out of the water pump with a flat blade screwdriver
4. Installing the Thermostat
Check the thermostat gasket before installing
Put the thermostat into place
Put the thermostat housing into place
Insert the two 13mm bolts into the thermostat housing
5. Installing the Upper Radiator Hose
Push the radiator hose onto the engine
Tighten the radiator hose clamp near the engine with a flat blade screwdriver
Push the radiator hose onto the radiator
Tighten the radiator hose clamp near the radiator with a flat blade screwdriver
6. Refilling the Coolant
Twist the radiator cap counterclockwise and off
Add coolant to the radiator using a funnel
Start your vehicle
Turn on your vehicle's heater
Make sure all the air bubbles are released from the coolant
Reinstall the radiator cap
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to show you how to replace the thermostat and housing. This is a 2008 Dodge Ram with a 5.7 liter. You'll need a drain bucket, flat-head screwdriver, 13 mm socket, ratchet, and extension, as well as extra engine coolant. This can easily be done from the ground, but we raised and supported our vehicle and put a drain bucket under our radiator.Open the drain on the bottom of the radiator. Drain the radiator down enough so that you won't get any fluid coming out when you take off the radiator hose. Then also close your drain when you're done draining it.
Your upper radiator hose runs from the top driver's side of the radiator to the top driver's side of the engine. Disconnect the clamp on the engine side with a flat-head screwdriver. It appears that on this vehicle the hose is already replaced, so it has these screw style clamps. You may find that you have clamps that you use pliers, such as this style. Slide your clamp out of the way and remove the hose from the engine.
Remove the two 13mm bolts that hold the thermostat housing to the water pump. Remove your thermostat housing from the water pump. Using a flat-head screwdriver, pry the thermostat out of the water pump.
Before installing your new thermostat, ensure that your part has a new gasket on it. This is the only seal on the thermostat. There's no gasket around the bottom of the housing. Reinstall your thermostat housing and your two 13 mm bolts.
Reinstall your radiator hose onto the thermostat housing. Tighten down your clamp with a flat-head screwdriver.
Remove the radiator cap by pressing down and, turning counterclockwise two clicks. Fill your radiator with Mopar approved 50/50 coolant.
Any time you drain the coolant from your vehicle, you're going to want to properly bleed the system. To do this, fill your radiator and your expansion tank. Turn the heat on in your vehicle and let it run.
With the cap off, wait until you see all the air bubbles come out, constantly checking the fluid level until the fluid level remains stable without any bubbling or draining. Then you're safe to reinstall the cap.
Ensure that your heat's blowing hot air. You're ready to go.
Thanks for tuning in. We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
HVA00729
In Stock
Product Reviews
Loading reviews
4.92/ 5.013
13 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
12
1
0
0
0
Everything went smoothly!
Jacob
November 19, 2018
Part got to me just as scheduled and everything fit great! Not my first time ordering from 1A, definitely wont be my last
Water pump
H
January 9, 2019
I would definitely recommend A1 auto. Five stars for sure!! I found them about 6months ago from a friend. I have a 2006 Chevy and did a lot of work on it through A1. Fair prices and great service. I will continue to use this company also if you are not sure you can do the work they also have videos as well. Thank you again for the good prices and also the the great service. Yall ROCK!!!!!!
Replacement part
george
February 27, 2019
Item is working great very fast shipping
Recommend 1aauto to everyone I talk to
Matthew
April 15, 2019
Everything bolted right up .
04 Dodge Ram water pump
Kenneth
October 4, 2019
Thanks So much shipping was fast got my Ram back on road
Install of pump was simple
Thanks 1aauto
Jonathan
December 6, 2019
Will buy again great products great price fast shipping
Everything as it should be!
Steve
March 3, 2020
Just another A on the report card for 1A auto! Water pump, gasket, and new thermostat. Found the step by step video for easy replacement at home in my own garage, just never mind the giant antifreeze puddle/mess I made. Thanks again!
Solid aftermarket
Kevin
August 11, 2020
Was concerned at first with aftermarket when it comes to critical components. I've been very happy with all of 1A Auto parts in the past and this is no exception. This is where value and price meet. Came with a gasket also!
Great service
Robert
January 7, 2021
When my truck needs work I always turn to 1A auto. The parts are delivered on time and the videos on YouTube are the perfect aid for the job. Keep up the good work!
Charles
July 11, 2022
Great service thank you
This is my go to for auto parts store.
Robert
February 4, 2024
Turn around time from ordering to delivery was about three days.
Two thumbs up
Corissa
August 23, 2024
The part fit and the truck runs good.
Water pump
Robert
November 8, 2024
EXCELLENT PART OEM+
PERFECT FIT
GREAT QUALITY
EASY SEAL INSERT
Customer Q&A
Does this come with a pump housing gasket?January 30, 2018
Jeramy S
10
Thanks for your question! The gasket is included with the pump. Thank you!!
February 3, 2018
Adam G
10
Yes
October 4, 2019
Kenneth W
Will this water pump also fit the 4.7L v8 ram 1500?February 7, 2022
Bo K
10
This part will not fit your vehicle, but we may have a part that is listed to fit.
Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
February 7, 2022
Emma F
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.