★★★★★
November 27, 2023
Trunk lid lifts
Gas pistons were a great replacement for the worn out gas pistons. Trunk lid now stays in place when raised.
Replaces
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.Speaker 2:Hi, I'm Don from 1A Auto. I hope this how-to video helps you out and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
If the trunk on your Chrysler Sebring is not staying up properly, then you'll probably want to replace your trunk supports and we're going to do that for you on this 2004 Sebring. It' s a pretty basic repair. You'll just need new trunk support pistons from 1AAuto.com and a flat blade screwdriver.
Now when you pop the trunk, when you go to lift it up, it should just lift automatically not just keep falling like that, but you can see the only way to get it to stay is to push it all the way back. Replacing them is pretty basic, a small flat blade screwdriver, there's a little slot that allows you access in between the head of the piston and that clip. Pry the clip out and pull on the piston. You usually want to pry that piston out about an 1/8 to 1/4 of an inch. You see the bottom comes off and then repeat the same process for the top. Best thing is to have a friend or helper holding the trunk up for you while you're doing this. New pistons from 1A Auto, you can see on the right exactly the same. It's going to fit in there correctly and do a whole lot better job holding up that trunk lid. Now you just line up the holes on the piston and push them right into place. Now we're going to replace the one on the other side and you can see it's identical, same process. Now when you pop your trunk and you just lift the hood up a little bit, it opens up the rest of the way by itself and that's how it should be.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
BHS03871
Gas pistons were a great replacement for the worn out gas pistons. Trunk lid now stays in place when raised.
Trunk lift pair for 2005 Chysler Sebring sedan snapped right into place just like the video showed. Only had them for two weeks, but work great, super easy to install, and the price was great. I should've done it sooner had I known it was a cheap easy fix.
My husband and I, love them we went months without any, we always had to hold it up with our hands, we are more than happy to have them, don't have to worry about the trunk falling on our head anymore because that really hurts. Now that I have found 1A Auto, we will be doing all our business with you all. Thanks Cynthia & Michael.
Purchase these for the trunk lid on my daughter Dodge Stratus. Her trunk lid started to resemble a guillotine. The slightest move in the trunk with slam shut up. It was dangerous. I installed these new struts and they work well even in the very cold weather .
