Kit Includes: (1) Passenger Side Mirror (1) Driver Side Mirror
Cover Color: Black
Cover Finish: Smooth
Housing Finish: Smooth
Mounting Hole Quantity: 3
Quantity: 2 Piece
Fold Away Mechanism: Manual
Mounting Hardware Included: No
Mirror Color / Finish: Paint to Match
Material: Plastic
Manual Remote Control: No
Connector Terminal Quantity: 3
Paint to Match: Yes
Aspherical Glass: No
Blind Spot Indicator: No
Heated: No
Integrated Puddle Light: No
Housing Color: Black
Wiring Harness Length: 17.72 in
Housing Turn Signal Indicator: No
Mirror Turn Signal Indicator: No
Mirror Memory Type: Without Memory
Adjustment Type: Electric
Specification
Side Location
Driver & Passenger Side
Body Type
Coupe
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications for an easy install
DOT Certified: Built to the highest quality standards
Complies with federal safety standard FMVSS-111
Matching set for a renewed appearance
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Side View Mirrors 2001-06 Dodge Stratus
How to Replace Mirror 2001-06 Chrysler Sebring
How to Replace Side View Mirrors 2001-06 Dodge Stratus
Created on: 2011-10-28
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
Putty Knife
8mm Socket
Ratchet
1. Removing the Door Panel
Pry up the trap door in the pull cup.
Pry off the trap door behind the door handle.
Remove the two Phillips screws just uncovered.
Remove the four screws around the outside of the door panel.
Pull the triangle trim piece off the door.
Use a putty knife to pry out the first clip behind the door. Pull the door panel along the edges to release the clips.
Disconnect the door handle rod and the harnesses from the back of the door panel.
2. Removing the Side Mirror
Disconnect the mirror harness from the door.
Remove the two 8mm nuts and one 8mm bolt that secure the mirror in place.
Pull the mirror free.
3. Replacing the Side Mirror
Run the harness through the door.
Replace the nuts and bolt that secure the mirror.
Reconnect the mirror harness.
4. Replacing the Door Panel
Reconnect the harnesses to the door panel.
Reconnect the door handle rod.
Put the panel over the lock tab.
Line up the door panel and push into place. Hit around the edges to push the clips in.
Replace the six Phillips screws.
Replace the triangle trim panel.
Close the trap doors behind the door handle and in the pull cup.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video we're going to show you how to replace the side rear-view mirror the driver side on this 2004 Dodge Stratus. The procedure is pretty much the same for the passenger side. On this vehicle the mirror is fine so we just take it off and put it back on for you to show you how to do it.
Tools you'll need are small flat blade screwdriver, Phillips screwdriver, a putty knife or a door panel clip tool and an 8 mm socket and ratchet. Also an 8mm wrench would work as well.
I use a small flat blade screwdriver and down in the pull cup here, pry out the little trap door. There's a little Phillips screw in there. Then in behind your door handle there's another Phillips screw in there. Then there's three Phillips screws, one there, there, there and then one on the back edge here.
Just going to fast forward as I use a Phillips screwdriver and remove six screws in all. This triangle here you can just pull out. All you need is a putty knife. Going to get down in behind the door panel here, slide it down, pull it up and then start to pull the ends. Then the door panel comes up.
Right here is your lock harness. The little button, press on that to disconnect. On your latch rod there's a clip. I'm just going to reach in behind with my finger. Have that clip off then the rod comes up and off. Then lastly down here is your window harness. There's a button right in the middle. You really got to push that button and then work the harness out. And your door panel's off.
Once your door panel's off you want to check these aqua clip pins here because there could be pins stuck inside of them. Use a pair of needle nose pliers, pull the pins out and then reinstall them on the inside of your door panel. With the door panel off just reach in behind here. There's a little tab to disconnect your mirror. Then there's three, two 8mm nuts here and an 8mm bolt over here. We'll fast forward here as we remove that 8 mm bolt and the two nuts. The mirror comes off.
To reinstall you reverse the procedure. Make sure your harness goes through, goes on. We'll speed it up again here as we put that other nut on and then start our bolt in and then tighten those three fasteners. You want them firm, not too tight. Then reconnect your harness.
Put your door panel back on. First reconnect your power window switch and make sure it clicks. Bring it close and reconnect your power door locks. Take this rod and put it into the hole and slip the clip right around the prong. Make sure your lock goes through. There is a large locating tab that goes into a big whole. Once you've got that you can make sure your pins go in. Peak in back and make sure all the pins go in correctly. Now it's just a matter or replacing all the Phillip screws. We'll speed up as we replace all those screws. There was one down in the door cup, behind the door panel, three at the bottom and then one at the back.
We hope this helps you out. It was brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We are the company that's here for you on the internet and in person.
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
Putty Knife
8mm Socket
Door Panel Removal Tool
Ratchet
1. Removing the Door Panel
Pry off the trim piece inside the door pull with a flat blade screwdriver
Pry off the trim piece inside the door handle with a flat blade screwdriver
Remove the Phillips head screw inside the door pull
Remove the Phillips head screw inside the door handle
Remove the four Phillips screws along the door panel
Pry off the mirror base trim piece
Pry out the door panel with a door panel clip tool or putty knife
Lift the door panel up and off
Disconnect the door handle rod
Disconnect the wiring harnesses
2. Removing the Side Rear View Mirror
Disconnect the side mirror wiring harness
Remove the two 8mm nuts from the side mirror
Remove the 8mm bolt from the side mirror
Remove the side rear view mirror
3. Installing the New Side Rear View Mirror
Insert the side rear view mirror into place
Insert the 8mm bolt into the side mirror
Insert the two 8mm nuts into the side mirror
Connect the side mirror wiring harness
4. Reinstalling the Door Panel
Connect the door handle rod
Connect the wiring harnesses to the door panel
Lift the door panel into place
Push in the door panel clips
Insert the Phillips head screw inside the door pull
Insert the Phillips head screw inside the door handle
Insert the four Phillips screws along the door panel
Push on the trim piece inside the door handle
Push on the trim piece inside the door pull
Push on the mirror base trim piece
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the side rear view mirror on this 2004 Chrysler Sebring. It appears the same for any 2001 to 2006, although some of the door panels may be a little different. We're going to do this on the driver side. The passenger side is the same procedure.
You'll need a new mirror from 1AAuto.com, flat blade screwdriver, Phillips screwdriver, and an 8mm socket and ratchet. There are two trap doors here. There's one right here behind the door handle and another one here in the pull cup. All you need to do is just stick the flat blade screwdriver into the little slot on the side of the trap door and just pry it out. Now what you want to do is remove each of these Phillips screws. There are six in total. We'll just fast-forward as Don removes those.
Take your flat head screwdriver and pry off that triangle panel. To release the clips on the back of the door panel, you just want to pull out all the way around the door panel. Once you've done that, you can lift it up and off of your door lock knob. Then behind the back of the door panel, you'll see here is your door handle rod. You just want to pop that clip up and pull that up and out. You want to disconnect the two harnesses here by just pushing in and pulling them out. Now your door panel is free.
Now to remove your mirror, you first want to just push in the tab on this harness and pull it out. Then you want to remove these two 8mm nuts and the one 8mm bolt. We'll fast-forward as Don removes these. Now you can just pull that mirror out and off. You may have to lift your rain guard to free it. It pulls right out.
The old side mirror is in the front, the new one from 1A Auto is in the back. You can see they're identical: same shape, same color, same mounting points, and the same harness.
Now to install your new mirror, run the harness through the door. Line up those studs and push them into place. Then you just want to start off these 8mm nuts by hand. You want to replace the bolt and just tighten everything up with your socket and ratchet. Reconnect your side mirror.
To reinstall the door panel, you just want to take that door handle rod, put it back into place, and reclip it. Then you want to just reconnect your two harnesses. Once you've done that, you want to just line up your door. Put it up and over the door lock knob and down into place. Then you just want to push those clips in around the edges of the door panel. We'll just fast-forward here as Don replaces those six Phillip screws. Now just replace your trap doors and that triangular panel.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chrysler is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Chrysler or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.