Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
To remove the parking light, first we're going to take this gasket and just remove it from these pins here. Next, there's a screw at the bottom corner of the headlight, and you can see it right there. This is a T10 torx screw. We remove that. It may want to just stay in there. Here we go. Then once that screw is out, you can actually just take the park light and pull it. Then these untwist. Then, finally there is a little side marker over here. Then I twist, and it pulls out.
You can replace your signal light or you could service the bulbs if you need to. So if your parking light got hit by a rock or something, obviously you don't need any selling points; you need to replace it, but you can see, if you're replacing it -- I mean, maybe you bought one of these trucks used and you just want to brighten up a little bit. I mean, you can see, here's the new part from 1A Auto, here's the original one, clearer, brighter, and then the important things is everything is designed to install just like the original, so this would go on with no problem.
We're ready to put the parking light in, so all the bulbs will go in, and twist. Here, put these ones on first. Twist. Then these go in and twist, and then put the side marker in, and twist. These teeth all have slots they go in, and it is possible to put them incorrectly, but if basically you push it up against the light and to the side against the light, and slide it in, and then it's in. Now, we use our T10 Torx screw, and put it through there. There it is, and tighten up. Let's put this rubber onto those pins, and you're all set. Then, the first time you close the hood, you want to make sure you close it slow and push that gasket in, and then put the hood down, because the first time you close it, it may kind of flop out incorrectly.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
