Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Fog Lights 2002-08 Dodge Ram 1500
Created on:
Tools used
10mm Socket
Ratchet
1. Servicing the Bulbs
Twist the bulb socket counterclockwise out of the light
Disconnect the wiring harness
Pull the bulb off of the socket
Push on the new bulb
Twist the bulb clockwise into the light
2. Removing the Fog Lights
Remove the 10mm screws from the fog light
Remove the fog light
3. Installing the Fog Lights
Insert the fog light into place
Tighten the 10mm screws to the fog light
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to show you removal and replacement of fog lights, as well as just changing the bulbs. It's a 2008 Dodge Ram. Same for 2002 to 2008, 1500, as well as the 2003 to 2009 2500 and 3500. You'll need new fog lights from 1AAuto.com, as well as a 10mm socket and ratchet.
You can access the back of your fog light pretty easily with the vehicle on the ground, but we're going to raise it up and just show you better underneath. If you're just looking to change the bulb, and for removal and installation, turn the bulb counterclockwise, pull it out, and you want to disconnect by pulling on the tab here and remove.
If you're just installing the bulb, reinstallation is just the reverse of that. Plug it back in. Put it in so it fits, and turn it to lock. You want to make sure you don't touch the glass part of the bulb when you're doing that, on the new bulb.
To remove a broken fog light, just remove these three screws. They're 10mm: here, here, and here. The light will come right out.
Reinstallation of the new light from 1AAuto.com, although we are just installing our old one, because it's in perfectly fine shape.
Put this side up in the first. Put it back in. Start the three bolts in. Tighten preliminarily. Check it from the front, and move it up and down if you like, and tighten up the bolts. Install the bulb as needed, and make sure it's plugged back into the harness. It's the same procedure for the driver's side.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Product Reviews
Loading reviews
5.00/ 5.04
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Fog Light Lens and Bezels
D
January 7, 2019
Awesome quality and super fit just like OEM
Completely satisfied
Perfect fit and just like OEM
D
January 19, 2021
These fog lights are a perfect fir and finish they are just as good or even better than OEM I highly recommend these for replacements you will not be disappointed.
08 Dodge Ram flood lights
mark
November 28, 2021
Fit like a glove! Very happy with the quality of these fog lights!
Good results
Bill
April 14, 2024
Easy to shop & order, perfect fit
Customer Q&A
Does this come with Hardware to mount the lamps to the bezels?October 1, 2019
Mocchi M
10
Hardware is not included. You can use your existing hardware or try to purchase it locally. Thank you for the inquiry!
October 1, 2019
Andra M
Im adding these on my 2003 1500 that did not have them from the factory, I looked under and saw the wiring plugs for fog lights, and I know that Ill need a dash switch thats designed for them. Is there anything else that I need ?April 29, 2020
T E
10
These parts are meant to be a direct replacement for vehicles that came equipped with fog lights from the factory. At this time, we do not have any instruction on how to upgrade your vehicle to have fog lights. Thanks for the inquiry!
April 30, 2020
Andra M
Adjusting screw,top or bottom ?May 6, 2020
John M
10
Thank you for your inquiry. When installed, the adjusting screw should be on the top. Please let us know if you have any further questions.
May 6, 2020
A C
Can I change my halogen bulbs to LEDs with these new lights?February 13, 2021
Tom M
10
These units are really only meant to be installed with factory style halogen bulbs.
February 15, 2021
T I
10
I have an 04 Dodge ram 1500 with factory fog light kit and add the HID kit and its worked well with no issues. That's my experience.
February 18, 2021
Ernesto L
Is the fog light lens Glass ?June 19, 2021
John D
10
No, the lenses are made of polycarbonate plastic.
June 19, 2021
Cristina P
Is the lens glass ?June 19, 2021
John D
10
The lenses are made from a polycarbonate plastic.
June 19, 2021
Cristina P
My 2006 dodge ram does not come with fog lights but it is pre wired with plug for them does these lights work with plug?May 30, 2022
John D
10
If your truck has the single plug that hangs near the fender on the drivers side, you will need to purchase a wiring harness that connect both fog lights to the main plug. You can google search 2006 Dodge Ram fog light wiring harness and find the harness. Thats what I had to do.
May 30, 2022
J E
10
If the truck has the plug, then yes it should plug directly in. My truck doesnt have the plug, so ai have to buy a factory harness for it. Best of luck.
May 31, 2022
C A
10
Yes when you plug it in they should work. Dont go to the dealer to have the sales code added all that does is when you flip to high beams the fog lights will go out. Also check to make sure there is a fuse in as well.
June 1, 2022
D E
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.