Kit Includes: (2) Tail Lights (2) Headlights with Cornering Lamps
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Headlights 1994-2001 Dodge Ram 1500
How to Replace Tail Lights 1994-2001 Dodge Ram 1500
Created on:
Tools used
Flat Blade Screwdriver
Phillips Head Screwdriver
10mm Socket
Ratchet
Cloth Rags
1. Remove the parking light
Using your flat blade screwdriver and rag remove the clips securing the gasket.
Use your Phillips screwdriver to remove the screw securing the parking light.
Remove the parking light assembly and set aside.
2. Remove the headlight assembly.
Use your rag to cover your bumper cover and remove the 10 mm bolts securing the headlight.
Use a rag and a flat blade screwdriver to pry the pin securing the headlight out.
Work the headlight out.
Unplug the harness.
3. Install new headlight assembly
Line up the new headlight
Plug in the harness
Clip it into place.
Push the pins securing the gasket in.
Use your 10 mm socket and ratchet to bolt the headlight in.
4. Install the parking light assembly
Plug in the harness
Clip the parking light assembly into place.
Screw in the Phillips screw.
This video is brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
This video details headlight replacement on a 98-2002 Dodge Ram truck. From the video you will see that this is an easy process. This is also how you would access the headlight bulb for replacement.
How you doing? I'm Mike Green. Today we're going to replace headlights on a 1998-2002 Dodge pickup. What we have here is the sport model. The headlight procedure for sport model and the regular model is the same. This procedure takes ten minutes; it's quite an easy procedure. Tools you'll need: a couple of rags to help protect your paint, a clip tool or I have a chisel and I'll use the rags and chisel together to get some of the clips off, a ten millimeter wrench and a ten millimeter socket with an extension and ratchet.
First using your clip tool or something to pry and the rag to protect the paint, you remove these three clips holding this gasket. Next remove your parking light by removing the little screw from underneath here, Phillips. After that screw is removed you can firmly comes out and unhook the bulb. Now you have three bolts to take out. One here at the front, one down here, this one you can either reach from the top here or you can reach down from underneath and one here on the side. You may want to cover your bumper cover, just to keep anything from getting scratched.
Okay now that you removed the bolts put the rags on to protect your cover. There's a small pin in here that's still holding a light. You can use something to pry on it and give it a good quick pry and then you want to move out and tilt the light forward while not letting the pin get stuck. You kind of want to pull outside of the truck and at the same time try to rotate the light forward. Now you can see your headlight connection and move your low beam and your high beam and the light comes right out. Okay insert the new light by kind of going upside down against the fender and rotating it on. Put your finger here to make sure this doesn't contact your paint and then pull the front out while you slide it on and push that under.
Okay, so now it's kind of in place. You reach in behind and connect your low beam, reach in behind and connect your high beam. There's a locating pin over here that you want to get in first, and now you can make sure this pin is here and that initial pin holds it in place. At this point you can push these pins back in and now you put your three bolts back in.
Now we've got the headlight in, we've got the three mounting bolts tight. It clips on. Now we're just going to install the parking light, plug in the lamp. Again make sure this clip's in, and this lower clip's in while the locating pin goes into to the hole, and just give it a good tap. A good push, plug it in. Now finally put in the screw to secure it. Now your left side's done.
This video was brought to you by the folks at www.1AAuto.com. All the parts in this video are available on their website. We hope you enjoyed this and we hope it helps you with your project. Thank you.
Tools used
Socket Extensions
Socket Driver
Ratchet
T25 Torx Driver
1. Remove the tail light assembly
Open the tail gate
Unbolt the two T25 screws anchoring the tail light assembly.
Disconnect the wiring harness and remove the bulbs.
Service your bulbs at this point or put your bulbs in the new tail light assembly.
2. Install the tail light assembly
Plug in the bulbs and wiring harness.
Clip the tail light assembly into the vehicle.
Replace the T25 Torx screws.
Close the tail gate
This video is brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet.
In this video, I am going to show you how to replace a tail light on this 1998 Dodge Ram, the same as any 94 to 01. The only tool you will need is a T25 Torx bit with a ratchet and extension or a driver. So, if you open there are two T25 Torx screws. That's probably the hardest part about this; knowing what tool to use. So your taillight pulls out. Then, if you're just looking to change a bulb, just twist these off. Twist these off. If you're looking to change your taillight assembly, new ones from 1A Auto. The bulbs pull right out. Push back in.
Reassembly is just a reversal of the procedure. There are pins back here that line up with holes in the cork panel. Make sure you line everything up. Push it on. Reinstall your screws.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts, and the best service on the internet. Please feel free to call us toll free 888-844-3393. We are the company that's here for you on the internet and in person.
Product Reviews
Loading reviews
4.90/ 5.010
10 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
1
0
0
0
great
mary
November 24, 2017
great service well packed.....easy installation. will shop here again.
Fit Great
Q
June 21, 2018
They sent head light bulbs as well great job good price.
1alht00259 dodge lighting kit
R
July 4, 2018
excellent product delivered in timely manner. would use your services again.
Old Dodge truck gets facelift
L
November 17, 2018
1994 Dodge tired but dependable had a bad case of cataracs and damaged tail lights. Your replacement lights fit perfectly and gave my old Dodge a fresh look Thank you.
New lights front and back
W
July 23, 2019
Nice addition to my 96 Dodge 44. Excellent quality and ez to install. Thanks
Headlights & Taillights
Carol
August 16, 2019
It was hard for me to find Headlights & taillights for my Dodge Ram 1500 because it was a Sport model. But 1aauto.com had the parts I needed and they came in a combo pack instead of buying them separately! I was so happy to find the parts for my truck and the price was a plus too! The customer representative was great helping me out online! I will definitely do business again! Also got my parts quick! A++++!! Thank yall so much!
E
January 3, 2020
good service, easy to use website parts fist right and arrived earlier than sheduled
Benjamin
November 1, 2021
It was super easy and looked great when it was done thank you and you guys are great to work with
Install was easy.
Royce
February 20, 2022
Install was easy. Though it seams to have lines showing when I turned on the headlights.
extra part with no instructions for it
Marc
November 30, 2023
received this light set and it was delivered with a one sided adhesive rubber strip for each tail light with no idea where it would go.
Hope someone could help
Customer Q&A
Will these headlights and tail lights fit a 1996 Dodge 1500 ram four-wheel drive sport laredo?September 28, 2020
Paul G
10
Thank you for the inquiry. These headlights and tail lights are listed to fit your vehicle based off the information you have provided. Please let us know if you have any additional questions.
September 29, 2020
Andra M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.