Pro Tip: Replace Handles in pairs or sets. Fading from the sun or age can make your Vehicle Handles and Bezels appear a hue difference next to new Handles.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Interior Door Handle 2002-08 Dodge Ram
How to Replace Interior Door Handle 2002-08 Dodge Ram
Created on:
Tools used
Ratchet
10mm Socket
Socket Extensions
1. Removing the Interior Door Handle
Remove the 10mm bolt from the door handle
Remove the door handle
2. Installing the Interior Door Handle
Thread the bolt into the door handle
Hook the door handle into place
Tighten the 10mm bolt to the door handle
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we are going to show you inside door handle replacement. This is a 2008 Dodge Ram, but it's the same process for 2002 to 2008. You are going to need new door handle or handles from 1AAuto.com and a 10-millimeter socket with a ratchet and extension.
Open up the door and there is a 10 millimeter bolt that holds the handle on. As you remove the bolt, you can just pull on the handle. Bring the bolt and the handle out at the same time.
Here's the original handle and the handle from 1A Auto. Exactly the same, we're just going to take the bolt from the old handle, and put it in the new one. We sell these in black, tan, as well as gray. Make sure your bolt is pretty well threaded in there.
You actually want a little bit sticking out the back side. Just kind of hook it in there and apply pressure and turn it clockwise. Hold it in place and tighten it up.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Tools used
Ratchet
10mm Socket
Socket Extensions
1. Removing the Interior Door Handle
Remove the 10mm bolt from the door handle
Remove the door handle
2. Installing the Interior Door Handle
Thread the bolt into the door handle
Hook the door handle into place
Tighten the 10mm bolt to the door handle
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we are going to show you inside door handle replacement. This is a 2008 Dodge Ram, but it's the same process for 2002 to 2008. You are going to need new door handle or handles from 1AAuto.com and a 10-millimeter socket with a ratchet and extension.
Open up the door and there is a 10 millimeter bolt that holds the handle on. As you remove the bolt, you can just pull on the handle. Bring the bolt and the handle out at the same time.
Here's the original handle and the handle from 1A Auto. Exactly the same, we're just going to take the bolt from the old handle, and put it in the new one. We sell these in black, tan, as well as gray. Make sure your bolt is pretty well threaded in there.
You actually want a little bit sticking out the back side. Just kind of hook it in there and apply pressure and turn it clockwise. Hold it in place and tighten it up.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
DHA49814
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.