Replaces
Part Details
Specifications
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
What's up, guys? I'm Andy from 1A Auto. Here I'm going to be replacing the front sway bar links in this 2016 Ram 1500. If you need this part or other parts for your vehicle click the link in the description and head over to 1aauto.com. You don't have to remove the tire to get to this sway bar link but we did for the sake of the video. It is a little bit easier to access it, but it's not necessary. I'm going to take a 18 millimeter socket and a breaker bar. It will loosen up this nut on the bottom.
And the stud is starting to spin, I am going to use a little bit of rust penetrant. Spray the top as well. So up to the bottom nut, I'm going to use an 18 millimeter wrench, and I'll use an 18 millimeter socket and ratchet. I'm going to hold the stud with the ratchet and the socket, loosen up the nut with the wrench. That's loose enough to do by hand. Take that off. With the top, I'm going to use a 16 millimeter socket and a ratchet, and I can use a 15 millimeter wrench and I'm going to keep the link from spinning, right there. Take the nut off.
At this point we're going to need to do the same procedure on the other side. The other side also removed and I can take a prybar, can just bend the sway bar up, pull this link out, just like that. Here's the old link, here's the new link from 1aauto.com. The shape is the same, it's got the same length, comes with new nuts, comes with bushings. The lower stud has a little area where you can put a wrench so that you can keep it from spinning. Get yours at 1aauto.com and you'd be ready to rock and roll.
Right. Now we're going to separate the nut and pull the bushing off. Get this started up here. Get the nuts started. And down below, get this started. And you're going to want to do the same with the other side. It's a good idea to do these in pairs. I'll take a pry-bar, fix this down, get this nut started.
Now, with the other side the sway bar link in the same position as this, I will take a 18 millimeter wrench and 18 millimeter socket and a ratchet, I'll tighten up the nut on the bottom. Now, I'm going to use the torque wrench and I'm going to torque this to 75 foot pounds, pull the wrench out, take a 15 millimeter wrench and I'm going to put it right there in a 16 millimeter socket and a ratchet and we'll tighten this up.
Once that starts to get tight, we'll get a torque wrench. I'm going to torque this to 16 foot-pounds. It's good. Now I'll do the same to the other side. If you took the wheel off, put the wheel on at this time.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
PSA55830
