Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Item Condition:New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Tailgate Strikers 2011-17 Ram 1500
Created on:
Tools used
T45 Socket
Ratchet
1. Removing the Tailgate Strikers
Open the tailgate
Loosen the striker with a T45 torx bit and ratchet with a pipe for leverage if needed
2. Installing the Tailgate Strikers
Line the washer up with the mark on the vehicle
Tighten the striker into place
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
All right, we'll open up the tailgate. And up here you'll find your striker bolt. There's one on each side, and to remove it, it requires a t-45 Torx bit and a socket. You're going to want a good long ratchet or maybe a ratchet with a pipe on it or something like that because these are usually really tight. Maybe not in this case. This one actually is looser than I expected. These are usually quite tight, though. So, we'll go ahead and spin it right out. Where this truck is still new—it has this bolt inside that's a captured nut. I shouldn't say bolt—it's a captured nut, really—and it allows the nut to move around so you can actually adjust this and get your tailgate aligned properly. So, we're going to take this, slide it right back in, and thread it in lightly.
What you want to do with the existing one, if you're reusing it, or a new one, is just line it up with the mark and that way you know it's in the right spot. The other option, if you have like a newly painted vehicle or something like that, then you'll have to play with it in and out to get it adjusted properly. But, for us, we're just going to line it up with the previous spot and tighten it up. There we are.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
06512878AA
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ram is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Ram or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.