Kit Includes: (1) Passenger Side Hood Lift Support (1) Driver Side Hood Lift Support
Quantity: 2 Piece
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Hood Lift Supports 2000-05 Ford Excursion
Created on:
Tools used
Flat Blade Screwdriver
1. Removing the Hood Support Struts
Pry out on the clips from the top and bottom of the struts with a flat blade screwdriver
Pull the piston out from the studs
2. Installing the New Hood Support Struts
Push the support on until it clicks into the studs
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the hood supports on this 2005 Ford Excursion. It's the same process on these excursions from 2000 to 2005. We show you on the driver's side, but it's the same procedure on the passenger's side. And the items you'll need for this includes new hood supports from 1AAuto.com and a flat blade screwdriver. You want something or someone to safely secure the hood while you're doing this procedure.
The hood supports are held on with these clips on the top and the bottom, and you just pry out with the clip, and pull the support from the studs. And make sure you have something or someone holding the hood when you do this. Now the support pulls free.
Up top is the old hood support; below it is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Push the support on until it clicks, and we always recommend you do these in pairs.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
GSA41142
In Stock
Product Reviews
Loading reviews
4.92/ 5.012
12 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
11
1
0
0
0
Easy to install, works great
H
January 8, 2019
Had to replace old hood support after it nearly fell on my head. Looked around and the rest looked really cheap. Ordered these and after watching Youtube to see how to replace them, it was done in about two minutes.
Quick easy install
R
March 18, 2021
Quality product with great instructions, I was able to remove and install both sides in under five minutes
William
August 9, 2021
Very simple installation and worked great. Highly recommend them.
Dean
September 20, 2021
Perfect fit.
Helen
October 18, 2021
These fit perfectly.
Craton
January 12, 2022
They work great and they fit perfectly.
Hood struts replaced
Albert
January 20, 2022
Same as shows in picture, very easy to replace, but best if you have a 2nd person to hold the hood when removing the old strut due to hood will fall. Took like 5 minutes for both sides. Different numbers on box, but I just match them from rear struts ordered too.
Roger
December 1, 2022
Perfect!
Hood lift arms
David
December 22, 2022
Works great,easy replacement
ROBERT
January 13, 2023
Perfect fit on my 2002 F250... Now I don't have lumps on my head from the hood falling anymore!!!
No more head knocks!
Gregory
March 13, 2023
Removed and installed as directed. Took approximately five minutes to do both sides. Previously, I had to use a hood prop. Work great! Highly recommend! Greg
HAYDEN
April 25, 2023
Wish I had replaced these, 200K ago. Still working, after 55k, will update if any issues arise.
Customer Q&A
how long are they extended and compression?January 2, 2019
Jesus Z
10
Actual Measurements are not listed or available. Our parts are exact replacements for your vehicle's OEM parts.
As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
January 2, 2019
T I
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.