Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Fog Driving Light 2001-05 Ford Explorer Sport Trac
How to Replace Headlight 2001-05 Ford Explorer Sport Trac
How to Replace Corner Light 2001-05 Ford Explorer Sport Trac
Created on:
Tools used
Phillips Head Screwdriver
7mm Socket
Ratchet
1. Remove the fog light assembly
Remove three Phillips screws to dislodge the plastic panel covering the back of the fog light assembly
Disconnect the bulbs and wiring connection.
Remove the three 7 mm bolts mounting the fog light.
2. Install the fog light assembly.
Mount the fog light assembly and secure with the three 7 mm bolts.
Connect the bulbs and wiring connections.
Fasten the plastic cover with your Phillips screwdriver and the three screws.
Brought to you buy 1AAuto.com. Your source for quality replacement parts and the best service on the internet. Hi. I'm Mike Green. I'm one of the owners at 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct ways to install parts from 1AAuto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video we'll be showing you how to access and replace the fog lights and fog light bulbs on this 2005 Sport Trac same as any 01 to 05 Sport Trac. Only tools you'll need are a Phillips screwdriver and an 8mm wrench or socket and ratchet. To access the fog light on either side you'll want to remove three screws. One, two, three, these are all three Philips screws. Once you have those screws out, you can move the panel out of the way enough to work in behind there. But for just shooting the video, I'm actually going to pull this down, and I'm going to pull these plugs out, and take the panel completely off, so you can see in there really well while I'm shooting.
Now with that out of the way, you can see that it's pretty clear up here. Even with that panel in the way you can reach your hand up in here. We're going to change the bulb, and you just need to twist that bulb a little bit, pull it down. If your fog lights been hit by a rock or something, or you have a little altercation, there are three bolts, one, two, three. These are either T20 Torx, or 7mm. I'm using a 7mm socket. Once you remove those bolts, your fog light comes right out. This ones in good shape, but the fog lights that 1A Auto sells, do bolt right in just like the originals. Obviously, to put it back in is just reverse of the procedure. Plug your fog light in.
We hope this helps you out. Brought to you by www.1AAuto.com . Your source for quality replacement parts, and the best service on the internet. Please feel free to callus toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Phillips Head Screwdriver
Channel-Lock Pliers
1. Removing the Headlight
Remove the Phillips screw at the top of the parking light
Pull the light out and set it off to the side
Pull up on the tabs on the back of the headlight. Use pliers to pull the tabs if necessary
Pull the headlight out
Twist the ring and pull the light free to change the bulb
Pull the connector free if changing the assembly
2. Replacing the Headlight
Reconnect the headlight
Put the light into place and push the tabs down on the back
Push the parking light back into place
Replace the Phillips screw
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet. Hi, I'm Mike Green, I'm one of the owners of 1A Auto. I want to help you save time and money preparing and maintaining your vehicle. I'm going to use my twenty plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1Aauto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video we will replace the headlights on this 2005 Ford Explorer Sport Track. Same as any 01 to 05 and tools you'll need are Phillips screwdriver and pair of pliers. OK so Ford Explorer headlight replacement you're going to need a Phillips screwdriver and possibly a pair of pliers, although you may just feel to do it with your hands.
Okay, you're going to start by removing a small Phillips screw, right here at the top of the parking light. These may be designed so that you don't have to remove this parking light, but I just find it easier to pull the headlight out of there with the parking light out. This screw you kind of unscrew and I'm working my finger in underneath the head of it to pull it out.
For some reason it just doesn't like pull out very easily. It loosens right up, but it doesn't come out. There it is. Okay. Go down on the parking light, you just give it a little bit of a pull. Okay, you can just kind of hang the parking light off to the right. Obviously, maybe check the bulb see if it's time to replace the bulb, should have an orange bulb on it. Okay. Then the headlight has tabs right on the top here. These tabs I believe are designed to pull up with your hand, but if your car has another part, I suggest a pair of pliers. Just kind of briskly lift up on the tabs. Okay. Then the headlight comes out. Might have to move the tab around a little bit, and then behind, you can either if you're looking to replace the headlight you'll twist this ring and pull the light out. Okay.
Now obviously your headlights free from the vehicle, if you're looking to replace the whole assembly because it's broken or something. Then reinstall. Twist the lock ring. The headlight if you were just wanting to disconnect this it pulls off pretty easy, you just kind of have to pull a tab up, so it will unlock it.
Then to put it back in, you want to look down at the bottom and make sure your bottom connectors are all the way through, then push on it, and then push the tab down and lock it into place. Okay, same thing, push on this side and push the tab down. Okay, if the tab doesn't go down pretty easily, you just want to make sure that you have everything in. I just kind of give it a little pull, make sure it's in there nice and tight. Then you bring your parking light over and push it in. Then screw carefully down in, don't drop it, tighten that up. Okay, there you go.
We hope this helps you out. Brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393 we're the company that's here for you on the internet and in person.
Tools used
Phillips Head Screwdriver
1. Removing the Parking Light
Remove the Phillips head screw from the top of the parking light
Pull the parking light forward and out
Twist out the parking light bulb
2. Installing the New Parking Light
Twist the parking light bulb into the new parking light
Push the parking light pins into the grommets on the vehicle frame
Insert the Phillips screw into the top of the parking light
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll show you how to replace the signal and side marker light on this 2005 Explorer Sport Trac, the same as any '01 to '05. The only tool you'll need is a Phillips screwdriver.
For Ford Explorer signal light replacement, all you're going to need is a Phillips screwdriver. You're going to start by removing a small Phillips screw right here at the top of the parking light. I'm taking out the screw. I kind of put my fingernail in underneath the head of the screw and pull up a little bit. It doesn't really like to come out otherwise. It kind of spins in there. After you have that out, you grip the light back in here and just pull it out, and basically change the parking light bulb. You can just twist that out, and your parking light is out. You can see there's two pins right here. They go into these grommets right here, so that's kind of what's holding it in.
If you have broken your parking light, see this is the new parking light from 1A Auto here. This is the old. You can see the 1A Auto replacement is exactly the same, a little clearer and shinier. Obviously, it has the same pins on the back here, just like the original. The light will plug in just the same. Obviously, to reinstall the side marker and signal, insert the bulb. Twist. Line up your pins, just place the light in place. As long as you have the light pretty close, it pushes back in. Put your screw in. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Product Reviews
Loading reviews
5.00/ 5.02
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Great job!
R
January 20, 2020
The lights arrived quickly and in great condition. It took me about an hour to complete the changeover. Everything fit well and looked great. Thank you.
Awesome
J
December 23, 2020
quick shipping, great quality and look great on my ford.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.