These coils are great. They fit like oem. Very easy installation and no issues so far with them.
Replaces
Replaces Air Filter
$81.55
OBD2 Diagnostic Scan Tool
$59.95
These coils are great. They fit like oem. Very easy installation and no issues so far with them.
I ordered and replaced all 8 of the coils on 9-19-22, I also replaced all spark plugs and wires. Today 12-11-23 I had to replace one of them on my #6 cylinder as it wasn't working and I had a misfire code. I too bought these due to ridiculous cost of OEM coils. I only had 8700 miles on these, should not have failed. Unfortunately I don't trust them to last and will be replacing the rest with OEM as I can afford them.
Works great. Best deal around.
90% of the effort was in the preparation to do the actual installation. (Those little keepers are a bear to get to release!) And, a plug wire puller tool would be handy for those boots at the exhaust manifold, for sure! One more thing: if you can let the engine get cold before you start pulling the plugs, they will come out easier by far. (Just sayin)
FAST SERVICE . very good price. thanks highly recomended.
Always have the right stuff at the right price! Specially in times as of today.
What was sold was correct and prompt shipping. If I need parts for my truck again I will be looking here first. 2 thumbs up
Price could not be beat. I questioned this purchase from the start. But I could not see paying over $900 for Motorcraft parts. The saleslady I spoke to convinced me to give them a try with a money back guarantee. Once I fixed problems caused by the dealership, I installed the coil packs. I was totally surprised. The miss is now gone. The fuel mileage went from 6-7 to 15-18 on E-85. No more check engine lights. Truck runs like new.....
Bought in september so far so good
A good set got me out of a pinch and still in my truck
Yes, these parts will fit your vehicle.
No, this kit will not fit your vehicle. Part number ICA66251 and ICA66252 are correct for your vehicle.
The coils have holes that match with the threads in the intake manifold and can only be installed one way.
The coils will only go on left side and the coils will only go on the right side all you have to do is match the coil when you take the old one out and you'll be fine Also you should put antics compound on the bolts that retain the coils so later on they won't break but be careful do not get it on the coil
This is not the correct part for your vehicle, but we do carry the one you need. The correct part number is, MCERK00012, which is the Motocraft brand and the only option we currently offer for the 2010 Ford F150 with the 5.4L engine. Please let us know if you have any other questions. Thank you!