Ok at best . Inside ports so rough I took a die grinder and carbide bit to knock some of the roughness off. One bolt hole was not drilled big enough an another bolt hole I had to die grind offset so all bolt holes lined up.
Replaces
Ok at best . Inside ports so rough I took a die grinder and carbide bit to knock some of the roughness off. One bolt hole was not drilled big enough an another bolt hole I had to die grind offset so all bolt holes lined up.
Fits perfectly
Better then the original part they were designed wrong from the factory.The new ones corrected the problem.
Wouldn't exchange after pointing out flaws, was told they are fine way they are and still can be used! Will never do business with this company again. Would give zero stars if I could! These were for a 429 BBF !
Parts bolted right up to hesd. But they are for a 52 Chevy, and I have yet to install the motor. Hopefully lots of clearance for steering shaft.
Great fit on my 1986 f250 4x4 with a 460 and manual transmission.
The product came in a timely manner. Fit perfectly on to the engine. Very happy with the service