Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs as well as replace the entire taillight assembly on this 2005 Ford Excursion. It's the same part and similar process on these Excursions from 2000-2005, and we show you on the passenger side, but the driver's side is the same procedure. The items you'll need for this include new taillights from 1AAuto.com and a T20 Torx Driver.
Start off by removing these four T20 screws, and we'll fast forward as Don does that. Now, pull the taillight out. To service the bulbs you just twist the socket counter-clockwise, pull the bulb out, push a new one in, and twist it clockwise to lock it, and you do the same thing with this one right here. If you want to replace the entire assembly just twist out both of your sockets.
On the left is the old taillight assembly, on the right is the new one from 1A Auto. You can see they're identical and they're going to fit exactly the same. On the back of our new assembly we're just going to remove these two lower stickers because we don't have a third bulb for the top. Some of the models might. Just twist in your two sockets. Line up those two tabs and push it back into place. Then replace those four T20 screws.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
