Kit Includes: (1) Passenger Side Tail Light (1) Driver Side Tail Light
Housing Color: Black Housing
Quantity: 2 Piece
Specification
Side Location
Driver & Passenger Side
Body Type
Wagon
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Housing ColorBlack Housing
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Taillight Bulbs 2000-04 Ford Focus
How To Replace 3rd Brake Light Bulbs 2000-07 Ford Focus 4 Door
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Tail Light
Open the tail gate
Remove the Phillips head screw from the tail light
Remove the wing nut inside the tailgate access hole by hand
Pull the tail light off by hand
2. Servicing the Tail Light
Pull the harness clips off the tail light assembly
Twist the light bulb bases counterclockwise
Pull the bulbs out of the tail light assembly
If replacing the bulbs, pull the bulbs out of their sockets, and install the new bulbs
3. Installing the New Tail Light
Put the light bulbs into the tail light assembly
Turn the bulb bases clockwise
Connect the harness clips to the light
Put the light into place, threading the bolt through its hole
Push the locating tab into its grommet
Attach the wing nut to the bolt inside the tail gate
Insert the Phillips head screw
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, I show you how to service the taillight on this 2003 Ford Focus ZX5. The only tool you'll need is a Phillips screwdriver.
When you open up your tailgate, right down here you'll see a Phillips screw. Remove this screw. Then in here, if you look up through here you'll see an access hole here with a wing nut. Remove that. Now this comes right off. On the back side there are two bulbs. These twist counterclockwise. You actually can pull these little harness clips that pull right off the light. Twist this counterclockwise; it comes out. Twist this one counterclockwise; it comes out. If you're just looking to change the bulbs, this one pulls straight out and this one does the same.
You can see that my current light is in good shape so I'm going to reinstall it. Put the light in. You want to line it up and then twist to lock. Put this one in, twist to lock. Put these back on, the studs. Down in. There's a little tab right up here. You kind of peek back in, see it, it goes into like you wanted and locks into place. Reach up under and put this back up in. Then a Phillips screw goes right into place. Tighten it up, and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Flat Blade Screwdriver
1. Removing the Third Brake Light
Open the trunk
Pry the two clips off the brake light with a flat blade screwdriver
Pull the brake light down
Disconnect the brake light wiring harness
2. Servicing the Brake Light Bulbs
Release the bulb bracket tabs
Pull off the bulb bracket
Pull any bulbs that remained in the brake light out
Push those bulbs into the bulb bracket if you are reusing them
Pull any bulbs that need to be replaced out of the bulb bracket
Push new bulbs into the bulb bracket
Push the bulb bracket into the brake light
3. Installing the Brake Light
Connect the brake light wiring harness
Push the brake light into place
Push in the brake light clips
Close the trunk
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace and service your third brake light on this 2005 Ford Focus. The only tool that you're going to need for this is a flat blade screwdriver.
Open up your trunk and on the back of your third brake light you'll see these two clips. Using a flat blade screwdriver pry out the center and pull it free. Then pull out the bottom part and that third brake light should pop free. Now, you want to disconnect this harness. Push the tab and pull it free.
To access your bulbs, you want to push in on these metal tabs and pull up on the plastic part. Do the same thing on this side, and for any bulbs left behind just pull them out and push them back into place. If you want to replace a bulb you just pull it out, push the new one in and then line up this light bracket and push it back into the third brake light assembly. Making sure all those tabs are reconnected, replace your harness. Push the third brake light back up in place and replace the bottom part of the clip and then the center. Do the same thing on the other side and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
1ALTP00488
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.