Replaces
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, I show you how to service the taillight on this 2003 Ford Focus ZX5. The only tool you'll need is a Phillips screwdriver.
When you open up your tailgate, right down here you'll see a Phillips screw. Remove this screw. Then in here, if you look up through here you'll see an access hole here with a wing nut. Remove that. Now this comes right off. On the back side there are two bulbs. These twist counterclockwise. You actually can pull these little harness clips that pull right off the light. Twist this counterclockwise; it comes out. Twist this one counterclockwise; it comes out. If you're just looking to change the bulbs, this one pulls straight out and this one does the same.
You can see that my current light is in good shape so I'm going to reinstall it. Put the light in. You want to line it up and then twist to lock. Put this one in, twist to lock. Put these back on, the studs. Down in. There's a little tab right up here. You kind of peek back in, see it, it goes into like you wanted and locks into place. Reach up under and put this back up in. Then a Phillips screw goes right into place. Tighten it up, and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
