Replaces
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we are going to show you how to replace a manual mirror on this 2005 Ford Focus with the same parts and similar process on this Focus from 2003 to 2007 and we'll show you on the driver side with the passenger side is the similar procedure and the items you'll need for this is a new side mirror from 1AAuto.com, a window crank removal tool or a paper clip, a flat blade screwdriver, a 1/4 inch or 6 1/2mm socket and ratchet, a T20 torx bit and a 10mm socket.
Take a paper clip and make a tool out of it. You want to bend it like that, bend this all the way straight. I'm going to take a pair of pliers and I'm just going to grab the very end of it and bend it right up into a little hook. Now I can take just a regular screwdriver and create that separation I need. Put my little tool in here, rotate it, and pull it up. That pulls the clip out and it comes off.
Pry off this small cover and then pry off this panel on your pull handle. Then remove these two 6.5mm bolts, and then this T20 and this series of T20 screws around the outside of the door panel. We'll just fast-forward as Mike removes all of those. Now pry off this bezel and then slide it forward. Pull out on this triangular panel, and then take your door panel and just lift it up and out of the window sill and pull it free.
Now twist off this ring and slide that cable out. Then remove this grommet, and you just pull it out. Then you want to remove this T20 screw and this 10mm bolt. Now T20 is actually stripped and not even really doing anything anymore. We don't really have to worry about that, but we'll remove this 10mm bolt. Then pull your mirror up and through the door.
Take your new mirror, slide the cables back through the door, and then just push the mirror back into place and replace that 10mm bolt. Then take that grommet, slide it back over the cables, and push it back into place.
Take your door panel and feed the door handle through the panel. Then push the top of the door panel back down into the window sill. Once you have it lined up and back in place, take your door handle, push it in, and just slide it forward. Then re-clip this triangular panel, slide this bezel back into place, and push it in. We'll fast-forward as Mike replaces all of those bolts and tightens them up. Replace that screw cover, and then just take that panel for your pull handle and slide the top in first. Then clip in the bottom. Make sure that clip's pushed in on your window crank, and put that washer into place. Then push the window crank back onto the stud.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
