Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the A/C and heater blower motor on this 2003 Ford F250, pretty much the same as any '01 to '07 Super Duty. A symptom of the blower going bad is if it starts making a loud groaning or high-pitch squeaking noise. That's when you know your bearings in your motors are going bad and it's going to need replacement. The only tools you'll need are 8 and 10 millimeter sockets with a ratchet and extension.
Your fan motor is right here on the passenger side and you're going to want to remove this junction box here first. Use a 10 millimeter socket on the extension with the ratchet. I'm going to fast forward as I just remove those two 10 millimeter bolts that hold that junction block in. One word of warning, you can see another little junction box right above where I'm working has two red wires going into it. That's a plow relay, this vehicle is equipped for a plow. You want to be careful not to touch any of your tools to those two posts because they are positively charged. The only way to prevent any sparks or anything will be not to touch them or to remove your positive and negative battery cables. Take this and carefully bring it up and out of the way. We're going to retrieve our two bolts.
Right here is the lead, just pull back on that tab, disconnect that. There's also a rubber moisture hose here. Just kind of pull that off. I'm going to use a ratchet and extension and 8 millimeter socket, and get this lower bolt here first. I'm going to fast forward again here as you just removed three 8 millimeter bolts. That's what holds the motor into the housing. There's my motor out. This tube just has a little collar that pulls off.
Here's the motor from 1A Auto. Put this gasket on. I'm going to fast forward as I kind of fumble with that gasket a little bit. It does have large holes on it, make sure those holes are lined up with the holes that the screws go in to. This goes one just like before. Push it in the hole and put the band around, hook it down in. Make sure the little alignment pins go through the holes here. Move the harness out of the way. We'll do some super-duper fast-forwarding here. Make sure you start all three of the fan motor bolts first then tighten them up with your 8 millimeter socket and ratchet and extension, then put the junction block into place and again, make sure that you start both bolts first then tighten them up. Last but not the least, plug it in and then reconnect your vent tube.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
HMA84770
Pleased with this purchase. Fit was spot on. No problems encountered. Did not give a five as it has only been installed about a week. Hope the longevity is as good as every other aspect - including competitive price.
Great service and shipping. Video was very helpful for installing.
Works great!
Worked perfect blows like a brand new one
works good
Perfect fit Perfect price Perfect on Timmy delivery Perfect how-to Visio A/C working fine in upper 90* weather I could not be more pleased and have told my friends about your company. Many thanks
This fit perfectly! It started to make a little noise so I asked if it was under warranty and the reply that I received was Yes it is under warranty and we are out of stock so we have refunded your money. I didn't even ask for that at this point. So just shows the level of concern they have for their customers happiness!!!
Perfect fit.
Easy to install and it works well
Blower fit like it should, Did not long to put in.
I put in my 2003 F250 super duty and the control knob works with this fan as it did with the OEM fan.
I had to replace both.
