Replaces
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace your blower motor on this 2005 Ford Focus. It's the same part and a similar process on these vehicles from 2000 to 2007. The only items you'll need for this is a new blower motor from 1AAuto.com and an 8mm socket and ratchet.
Start off by opening your glove box. On either side you'll see these tabs. Just push the sides of the glove box in and pull it down. Right here is an 8mm bolt just go ahead and remove it. Now push in the sides of your glove box and push it back into place. Then turn this panel sideways and pull it down and out. Next, push the tab on the harness and disconnect the blower motor. Right here, there's an 8mm bolt, another one here, and a third one right up there. Just go ahead and remove all three of those. As you remove the last one, the blower motor will come down.
On the right is the old one, on the left is the new one from 1A Auto. You can see they're identical, and they're going to mount exactly the same. Take your new blower motor and push it up into place. Line up those holes. Then replace the first bolt by hand and tighten it up. Then replace those other two bolts and tighten them up as well. Take care when tightening these, you don't want to over tighten them as you're just going into plastic. If you over tighten them you could strip the plastic out and they won't hold.
Reconnect your harness, and then feed this panel back up into place. You want to feed it up sideways, and then pull it down, and push it back down into place. Push in the sides of your glove box, pull it down, and then replace this 8mm bolt. Once you've tightened it up, push in the sides of your glove box, close it and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
