WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Dome Lamp Door Jamb Switch 1992-2001 Honda Accord
Created on:
Tools used
Phillips Head Screwdriver
8mm Wrench
1. Disconnect the battery
Use your 8 mm wrench to disconnect the negative battery terminal.
2. Remove the door jamb dome light switch
Pull back the rubber boot.
Remove the Phillips screw.
Pull the door jamb switch out.
Disconnect the electrical lead.
3. Install the new door jamb dome light switch
Connect the electrical lead.
Insert the switch into the door jamb.
Secure with the Phillips screw.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be showing you how to replace the door jamb light switch on this '95 Accord same as any '94, '97 Accord and many Honda models. We're going to start by disconnecting your negative battery terminal. The door jamb switch is on the front. Kind of pull down the boot and there's a screw right underneath. Pretty much the same for the rear as well although the screw is on the bottom side. The switch is the same though. Pull that down. Unscrew. You might want to use your screwdriver to kind of break the seal. Pull it out. Unhook it. The switch from 1A Auto here's the new one. The exact same as the original. It will bolt right in. On this car, this switch is in okay shape so I'm going to reinstall the original one. These switches ... the indicator is if your dome light works when you open the passenger's door but it doesn't work when you open the driver's door, that's usually an indicator that the switch is messed up. Reconnect it. Push it down in. Push it nice and flush. Push the boot.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free (888) 844-3393. We're the company that's here for you on the Internet and in person.
SWA41709
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Lincoln is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Lincoln or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.