Replaces

Ford Lincoln Mercury Front Driver & Passenger Side Upper 2 Piece Ball Joint Set TRQ PSA63121

02-05 Ford Explorer, Mercury Mountaineer; 03-05 Linc Aviator Front Upper Ball Joint PAIR

$ 34.95

$50.95

31% OFF

$50.95

31% OFF

FREE SAME DAY SHIPPING

Read 4 REVIEWS

PSA63121

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Description

Vehicle Fit

Warranty & Shipping

Part Details

Kit Includes:
(1) Front Passenger Side Upper Ball Joint
(1) Front Driver Side Upper Ball Joint
Quantity: 2 Piece

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.

Product Reviews

Loading reviews

4.50/ 5.0

Quality part for a great price

I was able to replace the upper ball joints without removing the control arm. Got the free loaner ball joint press from a local auto parts store. There will not be enough clearance for the c clamp to be used normally. Turn it around and be creative how to use the adapters. You will be able to figure it out. The ball joints were an exact fit when pressed in. There were no snap rings in the kit, but you will not use them anyway. The description should have said these come with no grease. Back to the auto parts store to get a grease needle ($4) for my grease gun. You will be surprised how much grease goes in each ball joint. Forums were not sure if you had to replace the entire control arm with the ball joint. I can testify you do not even have to mess with the control arm. I do not know about long term quality.

JOSEPH

Fast shipping,item as described, best price.will buy more parts from A1 auto

Ball joints

Robert

Watched balljoint replacement video, from 1aauto, ordered part and job went easy just like it showed, 1aauto has saved me a lot of money! Thanks 1aauto

Selvin

Good item easy to install

Customer Q&A

Will I need a press to instal these? The description says they come greased, do they?

October 14, 2020

M S

I used a Harbor Freight ball joint press to install these and they are pre greased.

October 14, 2020

Ward D

Yes you will definitely have to press them in as well press out the old ones ,I would suggest renting a ball joint press at your local auto part store ,and they do come Pre grease already hope this helps

October 14, 2020

Ernesto G

Thank you for your inquiry, Scott! Yes these are press-in bearings.

October 14, 2020

T I