WARNING: This product can expose you to chemicals including Formaldehyde and Toluene, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Windshield Wiper Arms 1997-2003 Ford F-150
Created on:
Tools used
Flat Blade Screwdriver
15mm Socket
Ratchet
1. Removing the Wiper Arms
Pry off the cap on the end of the wiper arm to expose the bolt
Remove the 15mm bolt
Press down and pull the wiper arm up
Remove the arm from the splines
Mark the location of the wiper blades
2. Installing the Wiper Arms
Press the wiper arm onto the splines
Tighten the 15mm bolt to the wiper arm
Press on the cap
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
Remove your wiper arms. Start small flat blade screwdriver or a pick tool. Just work it under the backside here. Pull up and off. There's a nut underneath, and repeat for the other side. 15 millimeter socket and ratchet to remove it. And remove the two 15 millimeter nuts. Usually you can break them free by pressing, and then you pull them up and off. And you can see, I've got a nice pollen mark here. You could also use a dry-erase marker and just mark where your wiper blades sit before you remove them.
Reinstalled the wiper arms and we noticed usually that when you have your wipers it kind of lines up with the windshield. What happened is somebody had put these wipers on incorrectly. They had the passenger side one on the driver's side. So the driver's side should go on and there should be about an inch between the bottom of the windshield here and where the wiper sits. And then this passenger side should just be up off and, again, about an inch between the wiper blade and where the black is on the windshield.
Press them down on. The driver's side has a little more of a bend in it than the passenger side and that allows those to sit straighter. Once you have them on there, your 15 millimeter nuts to hold them in place. And press them down and then tighten them up with the 15 millimeter wrench or socket and a ratchet. And if you ever detect that the wiper arms slip at all, you want to come on here and tighten them up more to get them to stop slipping. And then install the caps to finish it off.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
42625
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.