Replaces
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to show you how to replace the spark plugs on this 2002 Ford Escape with the 2-liter 4-cylinder engine. The items you'll need for this are a 5/16 spark plug socket and ratchet with an extension, and a spark plug gap tool.
To remove the spark plug wires you want to pull and twist at the same time. Then, using your 5/16 spark plug socket, an extension, and a ratchet, just remove the spark plug. We'll fast-forward as Mike does that. The spark plug will pull right out.
You want to gap these so the distance between the electrode and the diode you want to be between .048 and .052. I'm going to go to .05, and you want to run this through there. Should have a little bit of resistance and a little bit of resistance coming out. You could shrink it down by bending like that or prying it up, but we'll set them all again to .050. That one's good.
Back into the spark plug socket. We'll fast-forward as Mike tightens that spark plug back into place. Now take your spark plug wire and push it back down into place. Make sure it's all the way down. You'll hear it click a little bit but you can feel it click more. Then repeat the process for the other three spark plugs.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
