TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Direct Bolt-on Replacement: No modifications or special tools required
Complete Assembly: includes same mirror glass, housing, bracket and technology as the original unit
DOT Certified: Built to the highest quality standards
FMVSS-111 Compliant: Validated to be a dealership alternative
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Mirror 1993-97 Ford Ranger
Created on:
Tools used
Socket Extensions
Flat Blade Screwdriver
T20 Driver
Phillips Head Screwdriver
Ratchet
11mm Socket
1. Removing the Door Panel
Pry off the window crank cover with a flat blade screwdriver
Remove the T20 Torx screw from the window crank handle
Remove the two Phillips screws from the door pull
Pull off the door pull panel
Remove the Phillips screw behind the door pull panel
Remove the Phillips screw from the door pull panel
Lift the door panel up and off
2. Removing the Mirror
Pull off the mirror base backing
Remove the three 11mm nuts from the mirror
Pull off the mirror
3. Installing the Mirror
Put the mirror into place
Fasten the three 11mm nuts onto the mirror
4. Installing the Door Panel
Lift the door panel into place
Insert the Phillips screw into the bottom of the door panel
Insert the Phillips screw behind the door pull panel
Push on the door pull panel
Insert the two Phillips screws into the door pull panel
Put the window crank into place with its washer
Insert the T20 Torx screw into the window crank
Push on the window crank cover
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the mirror on this 1996 Ford Ranger, same as any '93 to '97 Ranger. This vehicle does have the manual locks and windows and manual mirror as well. Tools you'll need are flat blade screwdriver, a T20 Torx driver, Phillips screwdriver and an 11mm socket with a ratchet and extension.
You're actually going to go right in behind and, with a screwdriver, pry out lightly. You can see this comes out. You want a T20 Torx screwdriver. We'll fast forward as we remove that screw and take that crank handle off. Underneath here, you can see there's two Phillips screws. You'll want a smaller number one screwdriver. Fast forward again as we remove those two Phillips screws.
Now, you'll want to pull your panel right off and then there's another Phillips screw right here. There's a screw at the bottom of your door panel, you may have to dig through your rug a little bit to get at it. Remove it. Now take your panel, lift it up and it comes right off.
The mirror is right up here, pull this off and right inside you'll see there's three 11mm nuts to remove. Use an 11mm socket with a ratchet and extension. Fast forward here and it does take some torque to get them started sometimes and then be very careful not to drop the nuts down into the door as you're taking them out. Now your mirror comes right off.
Here's our original mirror and the new mirror from 1A Auto. You can see it's exactly the same. It's going to go in there and it's going to bolt on the same. The gasket's a little larger. It incorporates the two gaskets on the original into one but it's going to bolt on and these mirrors get broken off a lot. Obviously, to reinstall, put the panel there, take your extension with the bolt inside, carefully put it in there and start it on. After you start that first one, then start the other two, again carefully. Make sure you don't drop those nuts down into the door and then tighten them up firm but don't over-tighten them.
Put the door panel back on, up and over your door lock here first. You push it in place and down. Just put this screw in first. There's a little line up tab right down here. Make sure that goes in. Fast forward through putting those two Phillips screws back in. You want to tighten those firm but don't over tighten them. There's a little washer on the window crank tool. Put it in place. Put in a T20 Torx screw.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
MRA05133
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
24 yrs and still running
E
February 27, 2020
Those of you at A1 Auto were prompt, I got the part I needed at a great price. Sometimes tough to do these days. Keep it up.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.