Replaces

2003 Ford Ranger XL Rear Wheel Drive Front 10 Piece Steering & Suspension Kit TRQ PSA63499

95-01 Explorer; 98-011 Ranger; 98-09 B-series 2WD Front Steer & Suspension Kit (10pc)

$ 339.95

$442.95

23% OFF

$442.95

23% OFF

FREE SAME DAY SHIPPING

Read 23 REVIEWS

PSA63499

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

TRQ suspension kits are manufactured using premium raw materials and coatings for extended service life. Each TRQ suspension component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the life of your steering and suspension components, TRQ recommends replacing components in pairs, sets, or kits. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.

Product Features

Application Specific Design: No modifications necessary

Anti-Corrosion Coated: Enhanced surface life

Pre-greased: No additional maintenance required

Kitted for Restored Performance: Improved road-feel and handling

Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.

Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.

Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii.

Final shipping costs are available at checkout.

Product Reviews

Loading reviews

4.42/ 5.0

Awesome all around Company

I ordered over the phone (GREAT customer service rep) with easewas emailed every shipping detail, items were at my house quick....lower control arm had broken studone quick phone call and another one was on the way... no fuss no muss! ?? Try that with Rock Auto and watch what happens!?? you will be buying a new one somewhere else and no refund....1Aauto parts fit perfectly ?? Jeff B/GA

Parts were great. Packaging not great.

Craig

All the parts in this kit were all to spec and fit perfectly on my 2004 Ranger. Every needed bolt or nut was included such that I didn't have to use any of the old nuts that I tore up getting the original parts off. The packaging was disappointing. They used some ECO-friendly inflated pillow packing, but these heavy parts just pushed them around. That made them ineffective packing. This resulted in some studs on the Lower Arms being bent. I bent them back and cleaned up the threads and all went on fine. I've informed customer service and they said they'd pass on the info.

It fits

If you have a 98-01 Ford Ranger, 2.5 - 2.3L 4cyl engine, with front coil springs, this will fit. Great price for this kit. Mechanic wanted over $2k for parts and Labor, I purchased this kit, and some other parts for just over $500; then did it myself. Can't go wrong with 1aauto.

Exactly what I needed and parts look great !!

Parts look great and was a fairly comprehensive kit also. Could not give 5 stars due to I haven't installed kit yet.

Old Jeep parts

Alexandra

I've ordered from this company whole bunch of times and they are always on time. The service is great the packaging is well done. American company and the parts fit perfect

Lower control arm not durable.

Kaylen-D

I ordered a full suspension kit, and really only had a problem with one lower control arm, the shock studs one stud broke when torque to specs. Just got the run arounds with customer service.

Mark

First time using 1a auto. It was easy and when I had a question, I was able to talk to someone unlike rock auto. Rock Auto seems to want to sell to people but not talk to them. 1a autos customer service blew rock auto away. And its free shipping.

Randy

I haven't had a chance to put it on yet

Adolfo

Very good,

????

Aaron

Better than the OE parts because it has grease fittings. Nice hardware and saved a lot of time having bearings and ball joints already pressed in.

Jonah

Parts seem to be made with quality. Comes with grease fittings for ball joints on upper control arm and grease packets for inner tie rods. Cons: 1) wont fit any model equipped with torsion bars despite vehicle fit confirmation via website or phone call. 2) upper control arms are side specific and arent designated/labeled as such on either the part or any packaging.

Mark

Great customer service. Complete selection of parts as well as sets of parts needed. Despite the well-known, worldwide problems with shipping delays,, 1A auto delivered All of my order by their estimated delivery date !!

Ford ranger front end

Roderick

Perfect

2nd awesome suspension replacement

Derrick

Installed with no complaints from mechanic. My truck now rides like new money. This is the second truck that I've completed with a new suspension, and I am a happy camper. Thanks, 1A!!!

Randy

Everything fit perfectly

Good experience

Trudy

Great people. great products, great shipping, great return policy. My go to for all my 2003 Ford Ranger parts.

William

PERFECT FIT AND FUNCTION

Everything came in a timely manner. Everything was delivered in its entirety. Everything fit perfectly. Could not be happier.

Travis

Everything came in a timely manner. Everything was delivered in its entirety. Everything fit perfectly. Could not be happier.

Crappy metal

Gabriel

Horrible material on lower control arms. Stud that is meant to hold shock up twisted clean off with barely a twist as I went to snug up one of the rusty old nuts.( new nuts not included!) Luckily the control arm itself is made of the same crappy beer can metal, so I was able to easily cut of the stud, drill it out like butter and put a carriage bolt through. I do NOT trust these parts out on the road! I am carrying three more carriage bolts, multi tool and drill with me just in case. The company refunded my money for one control arm but I really should have got refunded for ALL the parts in my order, since I don't trust ANY of them now!

Easy fit. Marginal quality.

Bruce

The parts fit, but they're very cheaply made. The shock absorber studs on the lower control arms are pot metal, so they snapped right off when tightened. Hand tighten the shocks, then just give a little snug-up with a wrench and you might be OK. We drilled out the studs and inserted our own. That added a whole day to the job.

Don

Great value

Jeremy

Awesome product, exact fit and I am loving how much better my truck rides. I am a repeat customer and love the parts.

with a few adjustments this would be a great replacement

Alex

2003 Mazda b3000. Overall decent replacement. The rubber boots for the control arm ball joints collapsed after 2 months of use. There also seems to be very little grease/lubricant on the non-greasable ball joints. I had to spray some penetrating fluid into them. One of the shock absorber mounting bolts snapped before torquing it to the specified torque. Had to retro fit a replacement. The parts are sturdy ( treated alloy steel?) And fit well. If they made the ball joint rubber boots and welded studs of better quality and put greaseble fittings on all four ball joints, this set would've received 5 stars.

Everything was a perfect fit no problems

Kenneth

Everything was a perfect fit no problems

Customer Q&A

Are these parts made in America?

November 15, 2020

Barry M

These are manufactured by TRQ, TRQ is a high quality, high-end name brand that we offer and back with our 1A Auto Limited Lifetime Warranty.

November 16, 2020

Adam G

Is the kit for a ranger that has torsion bars or not?

February 20, 2021

Oscar I

For the ranger, in order to determine fit it is based off the trim and if your vehicle has RWD. For the ranger's that this kit is listed to fit, it is not specific to torsion bar or coil spring suspension.

February 22, 2021

Andra M

Is the kit for a ranger that has torsion bars or not?

February 20, 2021

Oscar I

Is your truck rear wheel drive?

February 22, 2021

Corey M

will this fit a 2003 ford ranger 4.0L FX4 with 4 wheel drive?

March 3, 2021

Jacob H

This part will not fit your vehicle. We may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle.

March 3, 2021

Ricale A

Will this part fit a 2001 Ford Ranger edge?

March 4, 2021

Angel A

This kit will not fit Edge models.

March 4, 2021

T I

Does this come with new fasteners?

April 4, 2021

C B

This kit only includes the hardware as shown. Unless otherwise damaged, the original mounting nuts and bolts should be reusable.

April 5, 2021

Daniel F

Will this kit work for a 06 ford ranger 3.0L?

November 12, 2021

Carlos H

This kit is not specific to engine size. It will fit your vehicle if it is an SXT, XL, or XLT with RWD. All specifications required for fitment are in the 'Vehicle Fit' tab on the listing.

November 12, 2021

Andra M

Will this kit work fine if my truck is lowered 2 inche in the front?its just a drop spring

March 2, 2022

Jose E

We are unable to guarantee the fit or function of these parts if the vehicle has been modified in any way with a lowering or lift kit.

March 2, 2022

Jessica D

Will this work on a lowered ranger?

March 2, 2022

Jose E

I think it will work. You just have to preload your joints correctly.

March 3, 2022

Derik S

Our steering and suspension parts are designed to replace factory units. We suggest referring to the lowering kit manufacturer's installation instructions to make sure it is designed to work with the OE parts.

March 3, 2022

Daniel F

Will this part fit a 08 ford ranger sport RWD?

March 3, 2022

David L

No, this kit is not listed to fit your vehicle.

March 3, 2022

Andra M

Does this fit a 2006 fx4 4.0?

June 11, 2022

Dante L

This part will not fit your vehicle, but we may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.

June 11, 2022

Kelly S

Will this work on an after market lift spindle?

December 8, 2022

Billy V

If it's the same size as the OEM, I don't see why it wouldn't fit. If it's bigger you'll need a lift kit set.

December 8, 2022

Kaylen-D M

This will not be able to fit for a vehicle with a lift kit.

December 8, 2022

Emma F

More than likely, it will fit. However, discuss this with your suspension specialist first. Once you've lifted the truck, you've pretty much screwed up all the suspension geometry. so all bets are off.

January 1, 2023

Bruce E

Does it lift the rear too, or no?

December 11, 2022

John D

This kit will not be for lifting the rear of the vehicle.

December 13, 2022

Emma F

Is this an extended travel kit or just replacement of stock specs?

February 10, 2023

Josh F

Stock specs

February 11, 2023

Brandan H

Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.

February 11, 2023

Ricale A

why is my truck making noise in my front end ?

June 3, 2023

John D

Have heard that the shock absorber bottom studs are soft and ring off easily. Is this true ? And have they been upgraded to stronger studs or need to be?

November 14, 2023

Marvin D

So far I havent had a problem but this is the first time owning a ranger.

November 15, 2023

Justin W