Replaces
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Mike from 1A Auto, and I hope this how-to video helps you out; and next time you need parts for your vehicle, think of 1AAuto.com Thanks.
In this video we're going to show you how to replace the AC and heater fan blower resister. We'll show you the beginning but basically the symptom of this part being bad is that you lose fan speeds. Say your fan works in position 1 and 2, but not 3 and 4, or position 1 and 4, but not 2 and 3, or any combination thereof. The only tool you'll need to do this is a 7 millimeter socket with a ratchet. Okay, if you're having any trouble with your fan speeds, say it works on 1 ... it only works on 1 and 4, but no 2 and 3, or any combination thereof, the usual culprit is what I'm about to show you here. There is a resister, and it's right under here. See, right there; and replacing it usually fixes that problem. To replace it, you are gonna want to disconnect it. There's a little tab right in the backside, push on that tab, got to work it back and forth, and pull the connector down. Now, pretty obviously, there are 2 7 millimeter bolts that hold it in, so I'm just fast forwarding through using a 7 millimeter socket and ratchet to remove their fasteners.
Okay, so here's our original, and new one from 1A Auto. See, they're all the same and you can see that even though this original one works, you see by how corroded it is how they can go bad. Any one of these resisters breaks or anything, that's what usually happens. But our new one from 1A Auto, it's going to go in there, work correctly. It's got a nice foam seal on here and everything. Okay, and pretty obviously, reinstalling it is just a matter of reversing the procedure. You want to make sure that the clip ... actually, it really doesn't matter, you can install it either way. But, usually you want to have the clip where the wire harness plugs in, the clip that locks it, that is usually towards the firewall, or the front of the vehicle. I put it up in there and I already have a bolt in it, then start that bolt, then start the second bolt, and then tighten them up. Obviously once it's bolted in place, then reconnect the wiring harness.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
The blower motor resistor is on the passenger side up underneath the glovebox. There's usually a trim panel that goes under here. It attaches via the plugs here and here, or bolts in, so you would pull those plugs out and then pull the panel down.
You just follow this wire right up, and there is a tab on the connector right there. Push that tab and pull down. Then two bolts hold it in place: one on each side. One there, and I'm going to block it, but one on the other side. Remove those two 8 millimeter bolts.
When you go to reinstall, you have your two holes where the bolts go, and then there's a locating hole in one of the corners. That goes towards the driver's side of the vehicle. Just put it up into place. Then start the bolts into place. Plug back in your lead.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the air conditioning and heater fan resistor. This is on a 2000 Ford Mustang, same as any '94-'04. The only tool you'll need is an 8mm socket with a ratchet and extension. Basically, when this starts going bad, you start to lose fan speeds. I've seen vehicles that only have high, or maybe they will work on the 2 low speeds but not the high speeds.
Your resistor is right up underneath here. There are two 8mm bolts. Here's your resistor hanging down. You just want to push on a little tab here, and pull your connector out.
Here's a new resistor from 1A Auto. Plug it right in. Push it right up in place here. Once you have both bolts fed in by hand, then use your 8mm socket with ratchet and extension and tighten them up.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
