Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Rear ABS Sensor 1990-2007 Ford Ranger
How to Replace Rear ABS Sensor 1990-2007 Ford Ranger
Created on: 2016-09-09
Tools used
Flat Blade Screwdriver
10mm Socket
Ratchet
1. Removing the Rear ABS Sensor
Remove the 10mm bolt from the ABS sensor
Pry the ABS sensor out with a flat blade screwdriver
Disconnect the wiring harness
2. Installing the Rear ABS Sensor
Connect the wiring harness
Insert the sensor into the differential housing
Tighten the 10mm bolts to the sensor
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video we're going to be working with our 2001 Ford Ranger, 4.0-liter V6. We're going to be changing out the rear ABS sensor. This information is the same from 1990 to 2007.
If you like this video, please click subscribe. We have a ton more information on this truck as well as many other makes and models. If you want this part for your vehicle, you can follow the link in the description to 1AAuto.com.
Here are the items you'll need for this repair: flat blade screwdriver, 10mm socket, and a ratchet.
The rear ABS sensor is located in the top of the rear differential on our truck. You may be able to access this from the ground, but we've raised and supported our vehicle to make it easier to show you. You'll have to remove a 10 millimeter bolt at the top of the sensor. Once the bolt is out, you'll want to use a small, flat blade screwdriver or a small pry bar to pry the sensor out of the differential housing. Lift up, and push the connector off of the sensor.
Here we have the old, rear ABS sensor that we removed from our 2001 ranger and our new part available from 1AAuto.com. As you can see, these parts are exactly the same. Our old part, where it is a magnetic sensor, does have some metal shavings from the differential stuck to it, and that's to be expected.
If these sensors go bad, it will turn your ABS light on, and cause a malfunction of the ABS brakes. It will show as "no wheel speed signal coming from the rear end of your vehicle". If you're having an ABS issue that you've narrowed down to your rear ABS sensor, this new part from 1A Auto is going to go in direct fit just like your original equipment and fix you up right.
Reinstall the ABS sensor into the differential, and be sure that it sits down wholly. Line up and tighten down the 10 millimeter bolt at the top. Reconnect the electrical connector.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
BSA70483
In Stock
Product Reviews
Loading reviews
4.78/ 5.018
18 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
16
1
0
1
0
Easy Fix
James
March 8, 2017
The part came quickly and it resolved my issue is about 5 minutes.
2002 Ford Ranger back middle sensor
David
June 19, 2017
Great product, worked perfect and best of all great price and easy to install
Good Sensor
Gilbert
March 14, 2019
Works well.
This was the exact same part!
Riley
September 19, 2019
I was very shocked when I uninstalled the old part to see that it was exactly the same and it fit the exact same way.
Super
Bryan
January 29, 2020
Arrived fast and in 100 percent shape.
Fit great
Brooks
February 18, 2020
Part fit as expected for my 1995 F150. No issues post-installation.
Great
Noah
August 26, 2020
Works exactly as it should with no issues. Easy to install just take off 1 bolt pull it out and put the new in.
Fun
Z
September 20, 2020
Found out by all the metal shavings have a bigger issue. Perfect fit and easy install
Ford 1999 And Speed Sensor
Maria
October 31, 2020
It was deliver very quick. It works great. I would recommend buying it from here.
morris
September 1, 2021
Perfect fit.
Robert
July 24, 2022
Perfect fit and solved the problem.
Broke no more
Michael
August 19, 2022
Excellent replacement part easy to manage with the old sensor removed
Gerald
September 9, 2022
1A auto is my truck store to go to
BILL
February 5, 2023
Worked great.
Daniel
February 5, 2023
Worked
1997 Ford Ranger Speed Sensor Replacement
Shea
December 3, 2023
Quality Hardware and performs as expected.
Would recommend
John
April 14, 2024
I would recommend it. It was a perfect fit. If someone does not know how to install one, they have an excellent resource video available. I always choose 1A.
Awsome part.
RICHARD
September 26, 2024
Works great.
Customer Q&A
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.