Replaces
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show how to replace an inside door handle, the front door handle, on this 2002 Ford Escape. It's pretty much the same procedure for any 2001 to 2004 Escape, as well as the Mercury Mariner. The only tools you'll need are a small flat blade screwdriver and a Phillips screwdriver.
To start out, use a small screwdriver, and remove this little trap door. To start out, use a little screwdriver, and there's a little trap door in here. Reach in and pry it out. There's a Phillips screw back in there. Do the same thing here. Pop that off. Remove the Phillips screw, and the Phillips screw right down in the door pull, and another Phillips screw on the back Just fast forward here as I remove those four screws.
Once you have those out, then pull your bezel around your door handle here off. Now, usually, you can reach around into this corner, start pulling out, and work your fingers underneath. Pull out the front, and this series of clips that hold the door on. There are two up in here. The door panel comes off. Basically, you have to kind of reach in underneath the front of it, and pull firmly, and then it comes out. Then, you just kind of lift your cable up, and it comes with a little bit of force, and pops right off. Your handle comes off.
Replacing the new handles is just a reverse of the procedure. You have to kind of push your lock button, push that down in, and force it down in a little bit, and it lifts up, and snaps down. Put it on the door, start it back, and it just locks back in.
First reconnect your harness. Hook the top up and over the weather strip here. Look back in here. Make sure the pins are going into the holes. Then, fast forward as I put the bezel on, and then the screws. The natural colored screw goes behind the door handle. The skinnier diameter black screw goes in the back, and then the two larger black screws go in the door pull, in the front of the door panel. Then, to finish up, make sure you just close the little trap door in behind the door handle, and put that front button trim back on.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
DHA49524
Order the part on a Friday it was delivered on Monday installed with the instructions that were provided it took only five minutes the dealership. $150 to replace the handle I will order from A1 auto again when I need parts.
I had the same issue. Carefully drill a small hole through both the handle and door and insert a small screw. Door panel covers it when installed.
The installation process should be very similar.
