TRQ Wire Sets are precision engineered to keep your engine running like new. Wire Sets naturally wear out over time and should be replaced every 50,000 miles to keep your car running in peak performance, reduce emissions, and prevent any damage to your ECU or sensors. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Pre-Greased: Seal created to ensure a proper connection with spark plugs
Noise Suppression: Minimized EMI and RFI interference with electronics
Application Specific Design: No modifications required
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
How to Replace Spark Plug Wire Set 2001-04 Ford Escape
Created on:
Tools used
No Tools Needed
1. Removing the Spark Plug Wire
Pull and twist the spark plug wire up
Remove the wire from the clip and the ignition coil
2. Installing the Spark Plug Wire
Insert the spark plug wire into the ignition coil
Press the spark plug wire into the spark plug wire
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet!
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the spark plug wires on this 2002 Ford Escape. It's the same part and similar process on these escapes, from 2001 to 2004. The only item you'll need for this is new spark plug wires from 1AAuto.com.
Pull up the first spark plug wire. Then you want to pull and twist the same time. Then pull off the top of this clip. Pull the spark plug wire free and then disconnect it from the ignition coil.
Take your new spark plug wire and you want the longest one for this spot. Connect it to the ignition coil. Push it back down into that clip and then push the spark plug wire back down over the spark plug.
You'll want to make sure it's pushed all the way down, then you should feel it click onto the spark plug. Then repeat the process on the other spark plug wires just doing one at a time so you don't get them mixed up.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
IWA69098
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Mercury spark plugs wire set.
Linda
December 13, 2023
The ordering was quick and easy , and delivery was right on time . This was my 2 ND set of wires from your company , but rodents chewed first set , so the person who recommended your company to me , was the one who put my new wires on. I will come back to your company for any other issues I might have with my car , as it is kinda my baby. Many thanks . I would recommend your company to anyone who needs parts
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Mazda is a registered trademark of Mazda Motor Corporation. 1A Auto is not affiliated with or sponsored by Mazda or Mazda Motor Corporation.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.